Overview
The Rock Slide Engineering AC-CRL-100 is a black vacuum pump relocation bracket. It is required to install the Rigid Series front bumper on 2010-2014 Jeep JK models, because it moves the vacuum pump out of the way of the bumper.
It is a mounting bracket rather than a bumper, made for the 2010-2014 Jeep JK.
Key features
- Vacuum pump relocation
- Required for the Rigid Series front bumper
- Steel construction with a black powder coat
Before you install
A vacuum pump relocation bracket moves the pump to a new mounting spot so the front end can be rebuilt around it. On a Jeep JK the pump sits near the front of the engine bay, so the bracket changes where the hoses and fittings run. Before starting, label each hose and take photos of the routing so the reassembled lines match the original layout.
Once the bracket is bolted in place, check that the pump has room to move freely and that no line rubs against the bumper, the radiator support or the steering components. Hose clamps should be tightened evenly, and any cracked or hardened hose should be replaced at the same time, since the pump is hard to reach after the bumper is on.
- Check for hose chafing after the first few drives
- Inspect pump mounting bolts for looseness
- Replace hardened vacuum lines during installation
- Keep the old hardware until the new bracket is confirmed fitted
Specifications
| Brand | Rock Slide Engineering |
|---|---|
| Part number | AC-CRL-100 |
| UPC | 887753113306 |
| Part type | Vacuum pump relocation bracket |
| Material | Steel |
| Finish | Black powder coat |
| Light mounts | Not included |
| Winch mount | Not included |
Vehicle fitment
It fits the 2010-2014 Jeep JK for the Rigid Series front bumper installation. Check the year, model and trim against your vehicle before ordering.
Installation notes
This bracket is required for the Rigid Series front bumper installation on the listed model years. The bumper cannot be fitted without it.









