Overview
The Fab Fours Pre Runner Winch Front Bumper, part number GS14-F3152-1, is a black powder-coated steel winch bumper with a pre-runner guard for the 2014–2015 GMC Sierra 1500.
Fab Fours redesigned the center section of this Premium bumper and added four integrated sensor holes for factory-equipped sensors. The holes are laser cut in the factory pattern and fit the OEM sensor housing. The internal winch tray has a new D-ring and fairlead location, and access slots in the lower tray let the factory sensor harness pass through. The bumper is built from a combination of 1/4 and 3/16 steel and sits on a 1/4 inch boxed mounting system that adjusts to custom angles. It is made in the USA with Fab Fours’ signature injection-molded light housings. The matching front and rear Premium bumpers from Fab Fours work with the factory park assist system.
Key features
- Four integrated, laser-cut sensor holes in the factory pattern
- Accepts winches up to 12,000 lb
- 3/4 inch D-ring mounts
- Boxed mounting system with adjustable positioning
- Fab Fours injection-molded light housings with 90mm fog and 60mm turn indicator lights included
- Access slots for the sensor harness
- Black powder coat, made in the USA
Before you mount a winch
A winch bumper changes how the front end of a truck carries load. The winch, fairlead and D-ring mounts sit forward of the factory structure, so the weight of the winch and the line adds to the front axle and the bumper brackets. Before mounting a winch, confirm that its capacity and mounting pattern suit the winch tray, and tighten every fastener to the torque in the installation steps. Pull straight on the line whenever possible, since angled pulls put side loads on the mounts.
A pre-runner guard protects the grille, headlights and radiator when the truck pushes through brush or low branches. Because the guard sits ahead of the bumper face, it can catch rocks and ruts at steep approaches, so inspect its welds after rough trail use. On a truck with factory parking sensors, keep the harness routed through the lower tray slots and clear of the winch drum and cable path. Light housings and wiring should be checked for chafing after each season of heavy use.
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | GS14-F3152-1 |
| Position | Front |
| Width | Full |
| Material | Steel, 1/4 and 3/16 construction |
| Finish | 2-stage matte black powder coat (bare steel is -B instead of -1) |
| Winch rating | Up to 12,000 lb or smaller |
| D-ring mounts | 3/4 in, included |
| Winch mount | Included |
| Light mounts | Included |
| Lights | 90mm fog and 60mm turn indicator lights included |
| Fit type | Direct fit |
Vehicle fitment
It fits the 2014–2015 GMC Sierra 1500 in Base, Denali, SLE and SLT trims.
The 2007–2013 and 2016–2018 Sierra 1500 bumpers are separate part numbers. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The 1/4 inch boxed mounting system allows adjustment to a custom angle, and the lower tray slots route the factory sensor harness.
What’s included
- Winch bumper with pre-runner guard
- Winch mount and D-ring mounts
- Light housings with 90mm fog and 60mm turn indicator lights
Not included: A winch.









