Overview
The Poison Spyder BFH front bumper package, part number JKSPECIAL08, is a set of bare steel parts for the 2007-2016 Jeep Wrangler JK Unlimited (4-door). It includes the BFH front bumper, a Brawler Bar stinger, recovery shackle tabs, a body-mounted tire carrier and Rocker Knockers.
The BFH front bumper, named for Built For the Hammers, is CNC laser-cut from one piece of high strength 3/16-inch plate steel, no wider than the frame rails, with an integrated winch mount. The Brawler Bar extends 7.4 inches forward and rises 9.8 inches above the bumper, and the shackle tabs are 1-inch plate for 3/4-inch recovery shackles.
The body-mounted tire carrier works with the stock rear bumper or most aftermarket rear bumpers and holds a spare up to 40 inches. The Rocker Knockers attach to the body at 14 bolt locations and protect the rocker panels.
Key features
- BFH bumper in 3/16-inch plate steel with integrated winch mount
- Brawler Bar stinger, 7.4 inches forward and 9.8 inches high
- Recovery shackle tabs from 1-inch plate for 3/4-inch shackles
- Body-mounted tire carrier for a spare up to 40 inches
- Tire carrier mounting points for Rot-Pax fluid packs and a Hi-Lift jack
- Rocker Knockers bolt to the body at 14 locations
- Slider skid with oval dimples, removable outer skid
- Bare steel
Rocker protection and body mounts
Rocker guards and sliders sit between the tires and the body, so they take hits from rocks and stumps. Body-mounted parts transfer load to the tub rather than the frame, which means fasteners and body panels need regular checks. Look for cracked welds, loose bolts and bent mounting plates after each trip.
Body lifts and suspension changes move the body relative to the frame. Parts that mount to the body move with it, so clearance to tires and driveline should be rechecked after a lift. Keep an eye on the gap between the body and the frame-mounted parts.
Tire carriers hold weight high on the vehicle. A spare near the top of its load range shifts the center of gravity, so keep the spare secured and avoid heavy accessories beyond the mount design. Clean the mounting surfaces when reinstalling after painting.
- Check rocker guard bolts after rough trails
- Recheck clearance after any body lift
- Keep the spare tire secured
- Clean mounting surfaces before reinstalling
Specifications
| Brand | Genuine Packages |
|---|---|
| Part number | JKSPECIAL08 |
| UPC | 700007616811 |
| Product | BFH front bumper package with tire carrier and Rocker Knockers |
| Material | Steel plate, 3/16 in |
| Finish | Bare |
| Width | Stubby |
| Body styles | 4-door models |
| Brawler Bar | 7.4 in forward, 9.8 in high |
| Tire carrier capacity | Spare up to 40 in |
| Tire carrier tubing | 1-1/2 in DOM |
| Rocker rail tubing | 1.75 in by .120 wall DOM |
| Winch mount | Included |
| Light mounts | Included |
| D-ring mount | Included |
Vehicle fitment
Poison Spyder lists JKSPECIAL08 for the 2007-2016 Jeep Wrangler JK, in the 4-door Unlimited versions.
The JK 2017-2018 model years and the TJ, LJ and JL generations are not in the list. The 2-door counterpart is JKSPECIAL09. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Bare steel needs paint or powder coat. The Rocker Knockers mount directly to the body tub, so they lift with the body when a body lift is installed.
What’s included
- BFH front bumper with winch mount
- Brawler Bar and shackle tabs
- Body-mounted tire carrier
- Rocker Knockers
Not included: a winch, a spare tire, paint or powder coat.


























