Overview
The Skyjacker LIB25R is a set of 2 rear Softride coil springs for a 2.5 inch lift on 2002–2007 Jeep Liberty (KJ) vehicles.
This spring requires lift kit suspension component PN LIB250, which is not part of this set. The springs are preset from 5160H chromium alloy and powder coated to resist corrosion.
Key features
- 2.5 inch lift height for the rear position
- Set of 2 Softride coil springs
- Preset from 5160H chromium alloy
- Powder coated to resist corrosion
- Direct fit per manufacturer
- Limited lifetime warranty
Lift kit compatibility
Rear coil springs on a lifted Liberty work with the rest of the rear suspension, so the spring rate and the lift components have to be planned together. A kit that raises the rear changes the angle of the control arms and the driveline, and a single component swapped on its own can leave the setup mismatched.
Because a rear lift affects how the axle sits, check the brake lines, parking brake cable and any exhaust hangers after installation. Note the condition of the upper and lower mounts and the bump stops, and make sure nothing contacts the body at full compression. Take a slow test drive over a familiar bump before going farther.
- Plan lift components as one installation
- Check brake lines and parking brake cable
- Inspect exhaust hangers after the change
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | LIB25R |
| UPC | 803696171517 |
| Lift height | 2.5 inch |
| Position | Rear |
| Quantity | Set of 2 |
| Material | 5160H chromium alloy |
| Finish | Powder coated |
| Required component | PN LIB250 (lift kit suspension component) |
| Fitment type | Direct fit |
| Warranty | Limited lifetime |
Vehicle fitment
It fits the 2002–2007 Jeep Liberty (KJ) in 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition and Sport trims.
Only the KJ Liberty entries are listed, so other Jeep models such as the Grand Cherokee are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Plan on the full lift setup with PN LIB250, and check driveline angles after a 2.5 inch rear lift is installed.
What’s included
A set of 2 rear Softride coil springs.
Not included: Lift kit suspension component PN LIB250, which the spring requires. Individual coils are available separately as well.






