Select your vehicle

Skyjacker Black MAX Rear Shock Absorber – B8389

Skyjacker

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rear Black MAX shock for 2018–2020 Jeep Wrangler JL
  • Designed for a 3.5 to 4 inch lift
  • Vehicle-specific multi-stage valving
  • Black boot included
  • Sold individually

Description

Overview

The Skyjacker B8389 is a rear Black MAX shock absorber for the 2018–2020 Jeep Wrangler JL, built for a 3.5 to 4 inch lift. It is a twin tube hydraulic shock with vehicle-specific multi-stage valving, sold as a single unit.

The shock’s foam cell compensates for oil expansion as the unit heats, so damping is designed to stay steady across temperature ranges. The foam design also allows the shock to be mounted at 180 degrees.

Key features

  • Rear position for the Wrangler JL
  • Built for a 3.5 to 4 inch lift
  • Vehicle-specific multi-stage valving
  • Increased fluid capacity for heat dissipation
  • Sintered iron piston and chrome-plated shaft
  • Black boot included
  • Limited lifetime warranty

Rear shock performance on a JL

The rear shocks on a Wrangler JL work with the coil springs to control axle movement on uneven trails and during braking. As the rear end travels up and down, the shock turns that motion into controlled resistance, which keeps the tires in contact with the ground and limits body roll on loose surfaces. A shock that has lost damping can allow the rear to bounce, skip over washboard sections and wear tires unevenly.

Lift height plays a large role in choosing a rear shock. A lift that changes the ride height or the angle of the axle changes the length the shock needs to cover, so measure the current setup before buying. Rear shocks are often replaced with the bump stops and bushings checked at the same time, because worn rubber parts can reduce the benefit of a new shock.

  • Measure your current lift height
  • Inspect bump stops and bushings
  • Check the boot for cracks or tears
  • Replace rear shocks in pairs when possible

Specifications

Brand Skyjacker
Part number SKYB8389
Shock series Black MAX
Position Rear
Lift range 3.5 to 4 inch
Shock type Twin tube, hydraulic
Fitment type Direct fit
Boot Black, included

Vehicle fitment

It fits the 2018–2020 Jeep Wrangler JL in both two-door and four-door Unlimited models, including Rubicon, Sport, Sport S, Moab and Sahara versions.

The list does not cover the 2021 and later JL, the Gladiator or the Wrangler JK. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

A 3.5 to 4 inch lift calls for the rear shock range named here, so check the lift height on your Jeep before ordering. Have the alignment checked after the rear shock is replaced.

What’s included

The SKYB8389 comes with its black boot. Compare the package contents with your installation steps before starting.

Not included: a second SKYB8389 shock, sold separately.

Fitment

VehicleYearsTrims
Jeep Wrangler (JL)2018–2020Rubicon (2-Door), Sport (2-Door), Sport S (2-Door), Unlimited Moab (4-Door), Unlimited Rubicon (4-Door), Unlimited Sahara (4-Door), Unlimited Sport (4-Door), Unlimited Sport S (4-Door)

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the Skyjacker B8389 fit a 2018–2020 Jeep Wrangler JL?

Yes. It fits 2018–2020 Wrangler JL models in two-door and four-door body styles. Check your year and body style before ordering.

What lift height is the B8389 built for?

It is built for a 3.5 to 4 inch lift at the rear. Compare that range with the lift on your Jeep, since shocks sized for a different lift can be too short or too long for the suspension.

Is the B8389 a rear shock?

Yes. It is a rear Black MAX shock sold individually. Install it on the rear axle, matching the position of the unit you are removing.

Does the B8389 come with a boot?

Yes. A black boot is included with the shock. Keep the boot in place during installation, since it protects the chrome-plated shaft from dirt, mud and road grime.

How do I know when rear shocks need replacing?

Look for fluid on the shock body, a rear end that keeps bouncing after bumps, and uneven tire wear. To test, press down on the rear corner and watch whether it rebounds more than once.

Should a rear shock be replaced along with the bushings?

Often yes. Worn bushings and bump stops can change how the rear shock works, so inspect them during replacement. Replacing worn parts together keeps the rear end controlled and reduces the chance of a repeat job.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon