Overview
The Skyjacker M9593 is an M95 Performance monotube shock absorber for light trucks, Jeeps and SUVs. The M95 line is a gas-charged, single-tube design that Skyjacker says runs cooler under extreme conditions.
The shock has a 46mm bore, an internal bump stop and 180 degree directional mounting. It is a direct fit design, and the front or rear position and lift range still need confirming for your vehicle.
Key features
- Gas-charged monotube design
- Large 46mm bore
- Internal bump stop
- 180 degree directional mounting
- Direct fit design
Things to check
Before fitting a gas-charged shock, confirm which position the axle needs, since front and rear units often differ in length and mounting. Check the mounting bushings and bolts for wear, and compare the shock’s length with your suspension height so the shock does not bottom out or bind near the mounts.
Gas-charged shocks are pressurized, so never cut or heat the body. Store them upright, handle them with care, and recheck the mounts and bolts after the first few drives. Watch for oil on the body, which signals a leaking seal.
Clean the rod and mounting surfaces before installing, and check the boot for tears that could let grit reach the seal. Compare the shock with the old one side by side, looking at length, mount style and bushing shape, to confirm the match before tightening anything.
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | M9593 |
| UPC | 803696211725 |
| Shock series | M95 Performance |
| Shock type | Monotube, gas charged |
| Bore size | 46mm |
| Mounting | Directional, 180 degrees |
| Fitment | Direct fit |
| Sold as | Each |
Vehicle fitment
No specific vehicles are confirmed for this shock yet. It is a direct fit design, so match your year, model and trim before choosing it.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Set the 180 degree directional orientation before tightening anything. Gas-charged shocks hold pressure, so release that pressure carefully before removing one.
What’s included
One Skyjacker M9593 shock absorber, sold as each.
Not included: Mounting brackets and hardware are not included with the shock.









