Overview
The Skyjacker Softride Nitro Shock Absorber, part number N8060, is a rear twin tube shock pressurized with 150 PSI of nitrogen gas. Its manufacturer fitment list covers a wide range of Ford F-series and Bronco models, Chevrolet and GMC K-series and V-series trucks, Ford Ranger and Excursion, Mazda B-series pickups and Toyota trucks from 1965 to 2018.
The N8060 uses multi-stage velocity sensitive valving, a bonded iron piston, a chromed piston rod and red polyurethane bushings. It carries a limited lifetime warranty and is available in 15 other colors. Its lift rating is written as w/10 – 9 in. Lift, which is unusual, so measure your suspension lift before choosing this rear shock.
Key features
- 150 PSI nitrogen gas pressurized twin tube
- Multi-stage velocity sensitive valving
- Bonded iron piston
- Chromed piston rod with 5/8 in diameter hardened and double chrome finish
- Red polyurethane bushings and red boot included
- Limited lifetime warranty stated by Skyjacker
Measuring lift before rear shock fit
A rear shock must match the lift already in place, because the suspension height sets the shock’s working length. Measure the lift at the rear axle before buying, and compare that measurement with the lift range this shock is rated for so it is not set too tight or too long.
Twin tube rear shocks on lifted trucks often see extra load on rough trails, so bushings and mounting hardware take more stress. Inspect them after every trip, and check that the rear axle has room for full travel before installing a new shock. Replacing both rear shocks on the same axle keeps the ride balanced.
- Measure rear axle height before ordering
- Check the boot and rod seal after each trail trip
- Replace rear shocks as a pair
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | N8060 |
| UPC | 803696153186 |
| Series | N8000 (Nitro Series) |
| Position | Rear |
| Charge | 150 PSI nitrogen gas |
| Construction | Twin tube |
| Piston | Bonded iron |
| Rod | Chromed, 5/8 in diameter |
| Bushings | Red polyurethane |
| Lift height | Printed as w/10 – 9 in. Lift |
| Warranty | Limited lifetime |
| Sold as | Each |
Vehicle fitment
The list covers 1967 to 1986 and 1975 to 1986 Chevrolet K-series models, 1987 to 1991 Chevrolet V-series, Ford Bronco 1966 to 1996, Bronco II 1984 to 1990, Excursion 2000 to 2005, F-100 1965 to 1976, F-150 1980 to 1996 and 2004 to 2018, F-250 and F-350 1980 to 1998, Super Duty 1999 to 2016, Ranger 1983 to 1997, GMC K-series and V-series models, Mazda B2300 and B4000 1994 to 1997, B3000 1994 to 1996, and Toyota Land Cruiser, Pickup and T100 models.
The list does not include Jeep Wrangler or Cherokee models, or the Ford F-150 from 1997 to 2003. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The printed lift range is inconsistent, so measure your suspension lift before installing the N8060. Confirm the rear position matches the axle you are working on.
What’s included
One rear shock absorber with a red boot, sold as each.







