Overview
The Skyjacker Softride Nitro N8012 is a rear gas-charged twin tube shock absorber from the Softride Nitro Series (Series N8000). Confirm fit for your vehicle’s year, model and trim before ordering.
The Nitro shocks are pressurized with 150 PSI nitrogen gas and use multi-stage velocity sensitive valving, an oversized piston head and an internal rebound bumper. The 5/8 in. diameter rod is hardened and double chrome, and the shock uses urethane bushings. Compression control is designed to prevent air bubbles and reduce fade. This shock is built for heavy duty and severe off-road use and runs a little stiff for most street driving.
Key features
- Gas-charged twin tube construction with 150 PSI nitrogen gas
- Multi-stage velocity sensitive valving
- Oversized piston head with internal rebound bumper
- Compression control that Skyjacker says reduces fade by preventing air bubbles
- 5/8 in. diameter hardened, double chrome rod
- Urethane bushings with a red boot included
- White shock body
Choosing the right shock
Gas-charged shocks use nitrogen pressure to resist foaming and fade when the shock heats up. That pressure stays in the unit even as it wears, so worn gas shocks should be handled with care. On a truck used for towing or hard off-road runs, the pressurized design helps the damping hold up over repeated hits.
Rear shocks are usually replaced in pairs so both sides damp the same way. Check the mounting hardware, bushings and boot at each service, and look for oil seepage or a hard, noisy ride as signs the unit is worn. Compare the lift height and ride height before choosing a shock, since a rear unit that does not match the suspension will feel wrong on the road.
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | N8012 |
| UPC | 803696146713 |
| Series | Softride Nitro Series (N8000) |
| Position | Rear |
| Construction | Twin tube, gas charged |
| Gas charge | 150 PSI nitrogen |
| Piston | Oversized piston head, bonded iron |
| Piston rod | 5/8 in. diameter, hardened, double chrome |
| Bushings | Red polyurethane |
| Collapsed length | 12.07 in. |
| Extended length | 19.07 in. |
| Shock stroke | 7 in. |
| Lift height | It carries no lift or drop. |
| Color | White body, red boot |
| Sold as | Each |
Vehicle fitment
Vehicle years, makes and models cannot be confirmed for the N8012 yet. It is a direct-fit shock with no lift or drop. Confirm fit for your vehicle’s year, model and trim before ordering.
A separate 2 in. front shock is made for suspension lifts only. This unit is the rear position, so confirm the position against your current shock before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Sold as each, so order one shock for each position being replaced. This shock will not lift a vehicle on its own.
What’s included
One Skyjacker N8012 rear shock absorber with a red boot. Sold as each.








