Overview
The Skyjacker YJ40FS is a front Softride leaf spring for the 1987–1995 Jeep Wrangler (YJ), intended for lifted setups using 3-4 inch lifted springs. It is a single front spring with a lift height range of 0 to 4.99 inches.
Softride leaves are made from American steel. Skyjacker says each individual leaf is shot peened with hardened steel pellets at high velocity. Shot peening compresses the steel surface and increases its tensile strength. Skyjacker adds that without this step, the wheel travel and ride quality would come at the expense of spring life.
Key features
- American steel leaves, each shot peened with hardened steel pellets
- Shot peening compresses the steel surface and raises tensile strength
- Designed for 3-4 inch lifted setups
- Front position, supplied as a single spring
- Lift height range of 0 to 4.99 inches
Front lift and steering geometry
A 3-4 inch front lift changes the geometry of the front end more than a smaller setup would, so steering and tire wear should be watched closely. Check the tie rod ends, drag link and steering box mounts while the front is apart, since loose parts show up more after a lift. Replacing worn items during the install saves a second trip.
Front shocks and their extensions usually need review once a larger front spring goes in. Look at shock travel and the bump stops, and inspect the front driveline angles and CV joints after the work is done. A fresh alignment is the last step, and it should be scheduled once the vehicle is at its new ride height.
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | YJ40FS |
| UPC | 803696167565 |
| Position | Front |
| Spring quantity | Single spring |
| Material | American steel, shot peened leaves |
| Lift height range | 0 to 4.99 inches |
| Intended lift | 3-4 inch lifted springs |
| Bushings | Conflicting: one field says rubber bushings included, another says not included. Confirm with the manufacturer. |
| Fitment type | Direct fit |
Vehicle fitment
It is a direct fit for the 1987–1995 Jeep Wrangler (YJ), covering every trim from Base to Sport.
It fits 1987–1995 Wrangler YJ models. Check your year, model and trim before ordering, since the TJ, LJ, JK and Cherokee XJ are different vehicles.
Installation notes
A 3-4 inch lift changes front axle geometry, so schedule an alignment after installation and check driveline angles. Check the package contents for bushings before starting, and have a set ready if none comes with the spring. Support the front axle before removing the original spring.
What’s included
One front leaf spring, supplied as a single unit.
Not included: Bushings. Check the package contents before installing, since they may not be included.





