Overview
The Skyjacker CR75S is a Softride rear leaf spring for a 5 to 6.99 inch lift range. It is sold as a single spring with rubber bushings already installed.
The springs are built from progressive multileaf packs in American steel. Load capacity is equal to or greater than the original equipment spring.
Key features
- Progressive multileaf pack construction
- American steel leaves
- Rubber bushings pre-installed
- Load capacity equal to or greater than OE
- Limited lifetime warranty from Skyjacker
Rear suspension and load
The rear leaves carry most of the cargo and bed weight, so the spring’s job changes with what the truck hauls. A progressive pack stiffens as it compresses, which helps keep the rear from squatting under load while still giving a comfortable ride when empty. Rear springs also set the pinion angle, so a lift that changes height at the back should be checked for driveline vibration.
Watch for signs of wear: a rear that sits lower on one side, cracked leaves, worn shackle bushings or U-bolts that loosen. Tighten U-bolts once the first few drives are done. Keep an eye on the rear bump stops too, because a sagging spring can let the axle hit them sooner. Clean and grease the shackles at regular service intervals to extend their life.
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | CR75S |
| UPC | 803696169804 |
| Position | Rear |
| Spring quantity | Single spring |
| Bushings | Rubber bushings included |
| Lift height range | 5 to 6.99 in |
| Material | American steel |
| Warranty | Limited lifetime |
Vehicle fitment
This spring is a Direct Fit design for a 5 to 6.99 inch lift. Compare that range with your suspension height, and confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One rear leaf spring with pre-installed rubber bushings.





