Overview
The Skyjacker S20RS is a single rear Softride add-a-leaf for a 2 inch lift. Its lift height range is 0 to 4.99 inches, and spring bushings are not included.
The spring is made from American steel and carries a Limited Lifetime Warranty. No specific vehicle is identified for this part.
Key features
- Rear position, Softride add-a-leaf design
- Lift height of 2 inch
- Single spring
- Made from American steel
- Spring bushings not included
Rear add-a-leaf basics
A single add-a-leaf adds one extra leaf to the rear pack, which lifts the rear and firms the ride under load. Because the spring works with the existing leaves, the way it is clamped and bushed matters as much as its steel. Good seating keeps the pack from shifting and helps the leaves move together.
Before fitting, check the rear shackles, hangers and axle seat for wear or cracks. Inspect the existing leaves for sag, because an old pack can make a new leaf sit unevenly. After installation, check the rear alignment and driveline angles, and recheck clamp bolts after the first drives.
- Check shackles and hangers for wear
- Inspect existing leaves for sag
- Recheck clamp bolts after the first drives
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | S20RS |
| UPC | 803696157139 |
| Position | Rear |
| Lift height | 2 inch |
| Lift height range | 0 to 4.99 inches |
| Spring quantity | Single spring |
| Material | American steel |
| Bushings included | No |
| Fitment | Direct Fit |
Vehicle fitment
No specific vehicle is identified for the S20RS. Confirm fit for your vehicle’s year, model and trim before ordering, and check the rear spring setup before installing.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Spring bushings are not included and must be obtained separately. Changing spring height affects alignment and driveline angles, so those should be checked after the work is complete.
What’s included
One rear Softride add-a-leaf spring.
Not included: Spring bushings.







