Overview
The Skyjacker T303S is a front Softride leaf spring for the 1984–1985 Toyota 4Runner (DLX, SR5) and the 1980–1985 Toyota Pickup (Base, DLX, SR5). It is sold as a single spring, and the product note says to order 2 for a pair.
It is a progressive multileaf pack made from American steel and meets or exceeds original equipment load capacity. It carries a limited lifetime warranty. Bushings are not included, and the recommended bushing part number is SKYSE30T.
Key features
- Front position leaf spring, sold as a single spring
- Progressive multileaf pack construction
- American steel
- Load capacity meets or exceeds original equipment
- Recommended bushing part number SKYSE30T, not included
Front Toyota spring fitment
Front springs on these trucks support the front axle and help set the height of the nose, so the new spring should match the original’s position and load role. Before the swap, look over the old spring’s leaves, eyes and perches. Cracks, bent ends or a sagging side are all reasons to replace the pair rather than a single unit.
Bushings must be sourced separately, so arrange them before the work starts. Check the bump stops and shock mounts as well, because a changed spring height can affect how they engage. Lubricate moving parts where the design calls for it and avoid overtightening the hardware.
After installation, have the front alignment checked and drive the truck gently at first. Note any pulling, wander or new noise, since those signs often point to a bushing, shackle or hardware problem rather than the spring itself.
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | T303S |
| UPC | 803696161990 |
| Position | Front |
| Spring quantity | Single spring (order 2 for a pair) |
| Bushings included | Bushings not included |
| Recommended bushing part number | SKYSE30T |
| Lift height range | 0 to 4.99 inches |
| Material | American steel |
| Construction | Progressive multileaf pack |
| Fitment type | Direct fit |
Vehicle fitment
It is a direct fit for the 1984 to 1985 Toyota 4Runner in DLX and SR5 trims and the 1980 to 1985 Toyota Pickup in Base, DLX and SR5 trims.
The list does not cover the Toyota Land Cruiser or other Toyota models and years outside those listed. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The recommended bushing, part number SKYSE30T, is not included, so have it ready before mounting the front spring. Support the vehicle on stands before removing the old spring.
What’s included
One front leaf spring, sold as a single spring.
Not included: Bushings. The recommended bushing is part number SKYSE30T.








