Overview
The Skyjacker J20RS is a rear Softride leaf spring for Jeep CJ5 models from 1976 to 1983, CJ7 models from 1976 to 1986 and Scrambler models from 1981 to 1985. It has a lift height range of 0 to 4.99 inches and is designed for use with 2.5 inch lifted springs.
The spring is made from American steel, and each leaf is shot-peened to increase tensile strength. That treatment supports full wheel travel and ride quality. Bushings are not included, so plan to obtain them separately.
Key features
- Rear position, single spring
- American steel leaves with shot-peened finish
- Lift height range of 0 to 4.99 inches
- It is designed for use with 2.5 inch lifted springs.
- Direct fit designation from Skyjacker
Rear spring setup
Rear leaf springs carry the axle and set rear ride height, so a replacement changes how the vehicle sits and how the driveline angles behave. Shackles, hangers and spring eye bushings work together with the spring, and worn pieces can make a new spring feel loose or noisy. Replacing them during the same job helps the rear end settle as intended.
Choose the spring with the lift you plan to run in mind. A rear spring matched to the wrong lift can leave the rear sitting too high or too low, which affects brake and shock geometry. After installation, check the driveline angles and recheck the torque on the U-bolts after the first few drives.
- Inspect shackles and eye bushings before assembly
- Check driveline angles after the spring is installed
- Recheck U-bolt torque after the first drives
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | J20RS |
| UPC | 803696143989 |
| Product type | Softride leaf spring, rear |
| Spring quantity | Single spring |
| Material | American steel |
| Leaf treatment | Shot-peened |
| Bushings | Not included |
| Lift height range | 0 to 4.99 inches |
| Use with | 2.5 inch lifted springs |
| Fitment type | Direct fit |
Vehicle fitment
It fits Jeep CJ5 models from 1976 to 1983 in the Base, Golden Eagle, Laredo, Limited and Renegade trims, CJ7 models from 1976 to 1986 in the Base, Golden Eagle, Golden Hawk, Laredo, Limited and Renegade trims, and Scrambler models from 1981 to 1985 in the Base, Laredo, Renegade, SL and SR trims.
Years outside these ranges are not covered, and the front position uses a different part. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Bushings are not included, so matching bushings must be obtained before the spring is fitted. Keep the spring matched to the 2.5 inch lifted setup Skyjacker specifies.
What’s included
One Skyjacker Softride rear leaf spring, part number J20RS.
Not included: bushings.





