Overview
The Skyjacker DR56S is a rear Softride leaf spring for 1994 to 2001 Dodge Ram 1500 and Ram 2500 pickups. It is a single spring, and two are needed for a pair. The rubber bushings are pre-installed on the spring.
The spring uses progressive multileaf packs, and Skyjacker states its load capacity equals or exceeds the original spring. Built with American steel, it carries a lift height range of 0 to 4.99 inches.
Key features
- Rear single spring for 1994–2001 Ram pickups
- Progressive multileaf pack design
- Load capacity equal to or greater than OE.
- Rubber bushings pre-installed
- American steel construction
- Lift height range of 0 to 4.99 inches
Pickup rear spring basics
Rear springs on half-ton and three-quarter-ton pickups carry the bed load and the weight of passengers, so they see daily stress even when the truck is not towing. A spring that has taken a permanent set will lower the rear end and change how the truck handles on corners. Looking at the spring height side to side is a simple way to spot an uneven or worn pair.
When the spring is replaced, the shackles, hangers and shock mounts should be looked over at the same time. Worn shackles can allow the spring to shift, and a shock that has lost damping can make a new spring feel unsettled. A quick inspection during the job saves a second trip.
- Compare ride height from one side to the other
- Check shackle bushings for cracks
- Look at shock mounts for wear
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | DR56S |
| UPC | 803696127613 |
| Product line | Softride leaf spring |
| Position | Rear |
| Spring quantity | Single spring |
| Bushings | Rubber, pre-installed |
| Lift height range | 0 to 4.99 inches |
| Material | American steel |
| Construction | Progressive multileaf packs |
| Fitment type | Direct fit |
| Warranty | Limited lifetime |
Vehicle fitment
The DR56S fits the 1994–2001 Dodge Ram 1500 in Base, LT, Laramie, ST and Sport trim, and the 1994–2001 Dodge Ram 2500 in Base trim.
Ram 3500 models and the older Ramcharger and W-series trucks are not covered by this entry; the DR40S and DR60S serve those. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Bushings arrive fitted to the spring, so the spring can be installed as supplied. Put the vehicle on stands and support the rear axle before the old spring comes out.
What’s included
One rear Softride leaf spring with rubber bushings pre-installed. Two springs make a pair.






