Overview
The Skyjacker J40FSB is a front Softride leaf spring for the Jeep CJ5, CJ7 and Scrambler, sold as a single spring. It fits the 1976 to 1983 Jeep CJ5, the 1976 to 1986 Jeep CJ7 and the 1981 to 1985 Jeep Scrambler, with a lift height range of 0 to 4.99 inches.
Skyjacker tapers each leaf across its full width, which creates more flex at the leaf ends. That taper spreads load over a greater area and reduces the chance of one leaf digging into the leaf above it. Bolt-style spring clips are used instead of cinch-style bend clips, which the brand says can bind and create friction across the leaves. American steel leaves are shot-peened with hardened steel pellets at very high velocity, a process Skyjacker says raises the spring’s tensile strength.
Key features
- Front position Softride leaf spring, sold as a single spring
- Tapered leaves that flex more at the leaf ends
- Bolt-style spring clips to reduce binding and friction
- American steel leaves, each shot-peened
- Designed for a lift height range of 0 to 4.99 inches
Tapered leaves and clips
Tapered leaves are a deliberate design choice that changes how a spring flexes. Thinning the leaf toward its ends lets the tips bend more freely, which helps the spring follow uneven ground without the center section taking all the stress. Different leaf shapes behave differently under load, so the taper should be considered alongside the spring’s position and the lift it is matched to.
Clip style affects how the leaves move against each other. Bend-style clips wrap the leaves and can restrict movement, while bolt-style clips hold the pack together with less interference. Clips should be checked for cracks or loose fasteners when the spring is serviced, since a loose clip can let the leaves shift and rub.
Front springs also interact with the bushings at each eye and the spring perches. Worn bushings allow sloppy movement that shows up as clunks over bumps. When a new spring is fitted, inspecting these points helps the new part work as intended.
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | J40FSB |
| UPC | 803696212692 |
| Position | Front |
| Spring quantity | Single spring |
| Bushings included | Bushings not included |
| Lift height range | 0 to 4.99 inches |
| Spring clip style | Bolt style |
| Material | American steel, shot-peened leaves |
| Fitment type | Direct fit |
Vehicle fitment
It is a direct fit for 1976 to 1983 Jeep CJ5 models in the Base, Golden Eagle, Laredo, Limited and Renegade trims, 1976 to 1986 Jeep CJ7 models in the Base, Golden Eagle, Golden Hawk, Laredo, Limited and Renegade trims, and 1981 to 1985 Jeep Scrambler models in the Base, Laredo, Renegade, SL and SR trims.
The list does not cover the 1959–1975 Jeep CJ5 or the Jeep CJ6, so those applications are not shown here. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Bushings are not included, so have a bushing set ready before the spring is mounted.
Support the vehicle on jack stands before removing the front spring.
What’s included
A single front leaf spring is included.
Not included: Bushings, per the product note and the specifications.




