Overview
The Skyjacker CR26S is a rear Softride leaf spring for 1968 to 1991 Chevrolet and GMC K and V series trucks, rated by Skyjacker for a 5 to 6.99 inch lift and fitted with rubber bushings already installed.
Each spring is a progressive multileaf pack. The load capacity meets the original equipment rating, and the spring is made from American steel. It carries a Limited Lifetime Warranty.
Key features
- Progressive multileaf pack construction
- Rated for a 5 to 6.99 inch lift height range
- Rubber bushings fitted before shipment from the maker
- Rear position, single spring
- American steel, per the manufacturer
Driveline and alignment after a lift
Raising the rear with a new spring changes the angle of the pinion relative to the driveshaft. That angle affects how the U-joints work and how smoothly power moves to the wheels, so a driveline check is a practical step after the swap. Rear spring changes can also alter rear steer and tire wear, which is why an alignment is worth scheduling.
Brake lines and the parking brake cable can sit closer to the frame after a height change, so look at their clearance during installation. Recheck the bolts on the spring and shackle after the first few trips, because new bushings can settle a little as they seat.
- Measure driveline angles after the swap
- Check brake line clearance
- Inspect U-joints for play
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | CR26S |
| UPC | 803696121499 |
| Product line | Softride leaf spring |
| Position | Rear |
| Spring quantity | Single spring |
| Bushings included | Rubber bushings included |
| Lift height range | 5 to 6.99 inches |
| Fitment | Direct fit |
| Material | American steel |
| Warranty | Limited lifetime |
Vehicle fitment
Fitment covers Chevrolet and GMC K and V series trucks from 1968 through 1991, with Suburban entries throughout and K30, K35, V30 and V3500 models among the pickups.
Chevrolet K1500 and K2500 pickups from 1988 onward and any Chevrolet Blazer are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The bushings are already fitted, so the spring can be installed without a bushing kit. A 5 to 6.99 inch lift makes a driveline angle check and a wheel alignment worthwhile after the swap. Block the wheels and use rated stands while the axle is unloaded.
What’s included
One rear leaf spring with rubber bushings pre-installed.
Not included: a second spring, because each part number covers one spring.




