Overview
The Skyjacker H7096 is a front hydraulic twin-tube shock absorber from the H7000 Softride Hydro series. It is rated for a 5 – 6 in. lift and is built for Chevrolet and GMC full-size trucks and SUVs. It fits 1999 to 2006 Silverado 1500 and Sierra 1500 models along with several related Avalanche, Suburban, Tahoe and Yukon years.
Multi-stage velocity sensitive valving handles the damping, while a bonded iron piston and a hardened, double chrome rod carry the internal load. Red polyurethane bushings and a red boot come with the shock. Additional colors are available.
Key features
- Hydraulic twin-tube construction
- Multi-stage velocity sensitive valving
- Bonded iron piston
- 5/8 in. diameter hardened and double chrome piston rod
- Red polyurethane bushings
- Includes red boot
- Covered by a limited lifetime warranty.
Front shock upkeep on full-size trucks
Full-size Chevrolet and GMC trucks and SUVs carry substantial front weight, and their front shocks work through every bump, brake application and turn. Over time the damping can fade, the rod surface can wear at the seal, and the bushings can crack. Regular checks of the boot, the mounts and the shock body help catch these problems before the ride becomes noticeably loose.
A front shock on a lifted truck interacts with the steering, the front brakes and the alignment, so a change at one point can affect the others. Confirm the suspension height falls within the stated range before fitting, and recheck the steering after the first drive. Keeping the boot clean and free of road grit also helps extend seal life on the rod.
- Inspect the red boot for tears
- Look for oil on the shock body
- Check steering travel after installation
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | H7096 |
| UPC | 803696170688 |
| Series | H7000 (Hydro Series) |
| Position | Front |
| Damping type | Hydraulic |
| Construction | Twin tube |
| Piston | Bonded iron |
| Piston rod | Chromed, 5/8 in. diameter, hardened and double chrome |
| Bushings | Red polyurethane |
| Boot | Red |
| Lift height | 5 – 6 in. |
| Fitment type | Direct fit |
| Quantity | Each |
| Colors | 15 other colors available |
| Warranty | Limited lifetime |
Vehicle fitment
It fits 1999–2006 Chevrolet Silverado 1500 (several trims), 2007 Silverado 1500 Classic, 2006 Silverado 1500 HD (LT), 2002–2005 Avalanche 1500, 2000–2005 Suburban 1500 and Tahoe, 1999–2006 GMC Sierra 1500, 2007 Sierra 1500 Classic, 2006 Sierra 1500 HD, and 2000–2005 Yukon and Yukon XL 1500.
Rear positions and model years not shown in this list are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The shock is set for a 5 – 6 in. lift, so confirm your suspension height falls in that range before installing. The quantity is each, so plan one shock for each front corner being replaced.
What’s included
One hydraulic front shock absorber with red polyurethane bushings and a red boot.
Not included: Mounting hardware is not part of this kit.








