Overview
The Skyjacker M9586 is a rear M95 Performance monotube shock absorber built for light trucks, Jeeps and SUVs. Skyjacker presents the M95 as a single-tube, gas-charged design that resists heat buildup under severe use.
The high-pressure nitrogen gas and floating piston support quick response. The lift range is 3 to 5.5 in., which is the figure to check against your suspension setup.
Key features
- Rear position
- Gas-charged monotube construction
- 46mm bore
- Internal bump stop
- 180 degrees directional mounting
- Built for lifts of 3 to 5.5 in.
Lift height and fitment
Lift height affects the length a rear shock must cover, so check your suspension height before comparing any shock to your vehicle. A shock with a lift range that is too low can bottom out on rough roads, and one that is too high may bind at the mounts. Measuring the installed length of your current shock gives a useful starting point.
Rear shocks are commonly replaced alongside bushings, bump stops and mounting hardware, since worn parts can change how the new shock loads. Look for oil on the body, a torn boot, and cracked bushings. Recheck the mounting bolts after the first few drives, and keep the directional orientation consistent on both sides. Pick a shock that matches your driving style.
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | M9586 |
| UPC | 803696212425 |
| Shock series | M95 Performance |
| Shock type | Monotube, gas charged |
| Position | Rear |
| Bore size | 46mm |
| Mounting | Directional, 180 degrees |
| Lift height | 3 to 5.5 in. |
| Fitment | Direct fit |
| Sold as | Each |
Vehicle fitment
It is a direct fit rear shock, with no vehicles confirmed for it yet. Check your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Set the directional orientation to the 180 degree mounting before tightening anything. The internal bump stop is part of the shock body.
What’s included
One rear Skyjacker M9586 shock absorber, sold as each.
Not included: Mounting hardware is not included with the shock.









