Overview
The Skyjacker H7036 is a rear Softride Hydro shock absorber from the H7000 series, a hydraulic twin tube design made for a 4 to 6 in. lift. It is direct fit and comes with red polyurethane bushings and a red boot.
Multi-stage velocity sensitive valving, a bonded iron piston and a 5/8 in. diameter hardened rod with double chrome finish make up the core build. A limited lifetime warranty applies to this shock. Confirm fit for your vehicle’s year, model and trim before ordering.
Key features
- Rear position shock
- Multi-stage velocity sensitive valving
- Twin tube construction
- Bonded iron piston and hydraulic action
- Hardened 5/8 in. diameter rod with double chrome finish
- Red polyurethane bushings
- Red boot included
Checking your lift height
Measuring the lift before ordering is the most useful check for a rear shock. Measure from the stock ride height to the current height at each rear corner, and compare the result with the 4 to 6 in. range. A shock that falls outside that range will not sit at the right length, and damping can feel too firm or too soft.
Rear shocks on a lifted truck take heavy loads, so inspect the bushings, boot and mounting hardware at each service. Replacing both rear shocks together keeps the rear end balanced. A worn unit often shows as oil seepage, a bouncing ride or a hard, noisy feel over bumps.
If the lift changes later, recheck the shock length and mounting angle before driving far.
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | H7036 |
| UPC | 803696136493 |
| Series | H7000 (Softride Hydro) |
| Shock series | Hydro Series |
| Position | Rear |
| Fitment | Direct Fit |
| Lift height | 4 – 6 in. lift |
| Action | Hydraulic |
| Construction | Twin tube |
| Piston | Bonded iron |
| Piston rod | 5/8 in. diameter, hardened, double chrome |
| Bushings | Red polyurethane |
| Included | Red boot |
| Sold as | Each |
| Other colors | 15 other colors available |
Vehicle fitment
The fitment range is direct fit with a 4 to 6 in. lift. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The 4 to 6 in. lift range is the key installation point, so confirm that your suspension lift height falls inside it before fitting this rear shock.
What’s included
One red boot is included with the shock, which is sold as each.









