Overview
The Skyjacker M9545 is an M95 Performance monotube shock absorber for the 2005–2018 Toyota Tacoma. It is sold as each and is a direct fit, with a nitrogen gas charge and a large 46mm bore.
The M95 design is a monotube body for light trucks, Jeeps and SUVs. The single tube helps keep operating temperatures lower under hard use, and the floating piston works with the high-pressure gas charge for a quick response.
Key features
- Monotube body with nitrogen gas charge
- Internal bump stop
- Large 46mm bore
- 180 degree directional mounting
- Floating piston technology
- Sold as each
Before you buy
A shock absorber controls how quickly the suspension moves after a bump or dip, which keeps the tires in contact with the ground. On a truck that sees rough roads or regular towing, worn shocks let the body bounce and the front end wander. A monotube design keeps the damping fluid and gas in one tube, which many drivers find more consistent when the truck works hard.
Fit is only part of the choice. Check that the mounting eyes and studs match your truck, then confirm that the travel and bump stop suit your suspension height. If the truck has other lift or spacer parts, the shock length should be checked against them before installation.
- Replace shocks in pairs on the same axle
- Inspect the bushings and mounts at the same time
- Look for oil seepage on the body and rod
- Recheck torque on mounts after the first drive
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | SKYM9545 |
| Shock series | M95 Performance |
| Shock type | Monotube |
| Charge | Nitrogen gas |
| Body bore | 46mm |
| Sold as | Each |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2005–2018 Toyota Tacoma in the Base, Limited, Pre Runner, SR, SR5, TRD Off-Road, TRD Pro, TRD Sport and X-Runner versions. Toyota 4Runner, Tundra and older Toyota pickups are not covered. Confirm your vehicle’s year, model and trim before ordering.
The list covers the Tacoma only, so the Toyota 4Runner, Tundra and older Toyota pickups are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The internal bump stop and 180 degree directional mounting mean the body should be oriented to suit your mounts before tightening. Have the alignment checked after installation.
What’s included
Check the package contents against your installation before starting.
Not included: the second shock for the other side of the truck.








