Overview
The Skyjacker M95 Performance Monotube Shock Absorber, part number M9521, is a front gas-charged monotube shock for 0 to 1.5 in of lift. It fits classic Chevrolet and GMC K-series and V-series pickups and Suburbans from 1967 to 1991, along with the Chevrolet Blazer and GMC Jimmy from the same era.
Monotube shocks separate the oil and the high pressure nitrogen gas with a floating piston inside a single tube. The single tube design helps operating temperatures stay cooler under extreme conditions. The 46mm bore, internal bump stop and 180 degree directional mounting match the M95 Performance line, and the M9521 is made for the front position.
Key features
- Monotube body that Skyjacker says runs cooler under extreme conditions
- High pressure nitrogen gas charge with a floating piston
- Large 46mm bore
- Internal bump stop
- 180 degree directional mounting
- Lift range of 0 to 1.5 in
- Shock boot included
Working on classic trucks
Classic trucks from the late 1960s through the early 1990s have older mounting points, worn bushings and bodies that have spent years exposed to road grime. Cleaning the shock mounts and eyes before fitting helps the new unit seat correctly and reduces the chance of binding.
A front monotube shock on these trucks works with the leaf springs, steering linkage and front axle. Check those parts when you fit a new shock, and keep the boot intact to protect the rod from grit. Retighten the mounting fasteners after a short drive, since older hardware can loosen as the truck settles.
- Clean mounting eyes and studs before installation
- Check the boot and rod for dents or rust
- Inspect steering linkage and front axle bushings
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | M9521 |
| UPC | 803696212456 |
| Shock series | M95 Performance |
| Position | Front |
| Construction | Gas monotube |
| Charge | Gas charged, high pressure nitrogen |
| Bore | 46mm |
| Mounting | 180 degree directional |
| Bump stop | Internal |
| Lift height | 0 to 1.5 in |
| Included | Shock boot |
| Sold as | Each |
Vehicle fitment
It fits 1967 to 1986 Chevrolet K10 and K20 pickups, 1968 to 1986 Chevrolet K30, 1987 to 1991 Chevrolet V10, V20 and V30, 1967 to 1986 K-series GMC trucks, 1979 to 1986 GMC K1500 and K2500, 1987 to 1991 GMC V1500, V2500 and V3500, and matching Suburban models, plus the Blazer and Jimmy models above. Trims such as Scottsdale, Silverado, Cheyenne and High Sierra apply by model.
The list ends with 1991 model years, so trucks built from 1992 onward are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
These are classic trucks, so compare the eye and stud locations with the original front shock before fitting the M9521. The shock is rated for 0 to 1.5 in of lift, so confirm the lift height on the vehicle first.
What’s included
One front shock absorber with a shock boot, sold as each.









