Overview
The Skyjacker pitman arm DA300 (SKYDA300) is a 6-inch extreme drop pitman arm for power steering Dodge Ram 1500, 2500 and 3500 trucks from 1994 to 1999.
It is made to address bump steer on a lifted truck and carries a limited lifetime warranty.
The DA602 is the matching arm for the later Ram trucks.
Key features
- 6 inch extreme drop
- For power steering
- Aimed at removing bump steer
- Limited lifetime warranty
Steering geometry on lifted trucks
The pitman arm is the link between the steering box and the drag link, so its angle and length set how the steering moves. Lifting a truck changes that geometry, and a longer drop arm changes it again, which is why the drag link and track bar angles are checked after the work.
Before buying, confirm the steering box type and the drag link length, since a drop arm alters the relationship between them. Inspect the ball joints, the steering box output and the tie rod ends for wear, because looseness in those parts can mimic a bad arm.
Once installed, have the front alignment and steering geometry checked, and tighten the nut to the correct torque. Re-check the nut after the first few drives.
- Check drag link and track bar angles
- Inspect steering box for leaks
- Re-check the pitman nut after installation
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | SKYDA300 |
| Amount of drop | 6 inches |
| Steering type | Power steering |
| Warranty | Limited lifetime |
| Fit type | Direct fit |
Vehicle fitment
It fits the 1994-1999 Dodge Ram 1500, Ram 2500 and Ram 3500 with power steering.
Ram trucks from 2000 onward are covered by other arms such as the DA602. Confirm your vehicle’s year, model and trim before ordering.









