Overview
The Skyjacker M9577 is a rear gas monotube shock absorber from the M95 Performance series, sized for a 5.5 – 8 in. lift range on 2000–2004 Ford Excursion models. It suits owners of lifted Excursions who need a shock matched to that lift.
The shock uses a single-tube gas design with high pressure nitrogen gas and a floating piston, plus a 46mm bore and an internal bump stop. The M95 series is built for light trucks, Jeeps and SUVs.
Key features
- Gas monotube design
- High pressure nitrogen gas charge
- Floating piston
- Large 46mm bore
- Internal bump stop
- 180 degree directional mounting
Excursion lift and shock length
Lifted full-size SUVs carry more weight and move through a larger range of suspension travel, so the rear shock works harder than it does at stock height. Matching shock length to the lift keeps the piston within its stroke at both ends of travel, which helps prevent bottoming out or running out of extension.
Because the Excursion’s rear axle and frame differ by lift kit, check ride height and clearance before choosing a length. Many owners replace rear shocks as a pair so both sides damp the same way. Keep the lift kit’s brake line and driveline clearance in mind as well. Inspect the bump stop, mounts and shock body after rough trips, since oil seepage and loose hardware are early signs of wear.
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | M9577 |
| UPC | 803696212357 |
| Series | M95 Performance (M95 Series) |
| Position | Rear |
| Construction | Monotube |
| Gas charge | High pressure nitrogen |
| Piston | Floating |
| Bore | 46mm |
| Bump stop | Internal |
| Mounting | 180 degrees directional |
| Lift height | 5.5 – 8 in. |
| Fitment type | Direct fit |
| Quantity | Each |
Vehicle fitment
It fits 2000–2004 Ford Excursion Eddie Bauer, Limited, XLS and XLT models.
Other Excursion model years, other Ford SUVs and front positions are not covered by this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm your Excursion’s lift falls within the 5.5 – 8 in. range before installing. The quantity is each, so match the number of shocks to the number of rear corners being replaced.
What’s included
One rear gas monotube shock absorber, quantity each.









