Overview
The H7028 is a rear Softride Hydro shock absorber designed for suspension lifts of 4 to 5 inches and sold individually. It fits the 1984-2001 Jeep Cherokee (XJ), the 2004-2006 Jeep Wrangler (LJ) Unlimited and the 1997-2006 Jeep Wrangler (TJ).
It has a heavy-duty twin tube body and a 5/8 inch hardened double chrome rod. Multi-stage velocity sensitive valving manages compression and rebound, and an oversize piston head and expanded fluid reservoir help keep damping steady with less foaming.
Key features
- Hydraulic action with multi-stage velocity sensitive valving
- Heavy-duty twin tube construction
- 5/8 inch hardened double chrome rod
- Oversize piston head for steady damping
- Expanded fluid reservoir that reduces foaming.
- Designed for a 4 to 5 inch lift
Long-travel rear shocks
A rear shock on a heavily lifted vehicle works through a longer stroke than a stock unit, which is why stroke and length matter when choosing one. A shock with insufficient travel can bottom out on rough ground, and an unsuitable mounting position can bind the shock. Confirming the lift height before ordering is the simplest way to avoid either problem.
The lifted rear end puts more load on the mounting hardware, bump stops and bushings, so inspect them at the same time. Worn bushings and cracked mounting eyes can let the shock move in ways it was not designed to, which speeds wear. Keep the boot clean, look for fluid on the body, and check the bushings after trail use. Replacing both rear shocks together keeps the back end balanced on the road.
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | H7028 |
| UPC | 803696136042 |
| Shock series | Hydro Series |
| Position | Rear |
| Lift range | 4 to 5 in. lift |
| Collapsed length | 14.82 in. |
| Extended length | 24.84 in. |
| Shock stroke | 10.02 in. |
| Piston rod | 5/8 in. hardened double chrome |
| Body | Heavy-duty twin tube |
| Sold as | Each, sold individually |
Vehicle fitment
It fits the rear position on a lifted suspension in the Cherokee XJ, Wrangler LJ Unlimited and Wrangler TJ trims covered here.
Not covered: Wrangler YJ, JK and JL models, and Cherokee and Grand Cherokee years outside 1984-2001. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Use this shock only on a suspension lifted 4 to 5 inches. Its collapsed length is 14.82 in. and its extended length is 24.84 in. Compare these figures with your current rear shock before ordering.
What’s included
One rear shock absorber. Not included: the suspension lift kit and any second shock needed for the other rear side.









