Overview
The Skyjacker M95 Performance Monotube Shock Absorber, part number M9502, is a gas-charged monotube shock built for light trucks, Jeeps and SUVs. Its single-tube body is designed to run cooler than a twin-tube design under heavy use.
Inside, high-pressure nitrogen gas works with a floating piston for quick response. A 46mm bore and an internal bump stop complete the build, and the shock mounts in a 180 degree directional orientation.
Key features
- Monotube body that Skyjacker says keeps operating temperatures lower under extreme use
- High-pressure nitrogen gas charge
- Floating piston design for quick response
- Internal bump stop
- 46mm bore
- 180 degree directional mounting
Choosing a replacement shock
A monotube shock keeps the working piston in one tube with a separate gas chamber, so heat leaves the body more evenly than in a twin-tube design. That matters on long descents, desert running and repeated climbs, where fluid temperature rises and damping can fade. When choosing a replacement, match the shock’s length and mounting style to your suspension, and think about how the vehicle is used. A shock suited to weekend trail driving may feel firm on a daily commute.
Gas-charged shocks should be inspected after hard use for oil residue, leaks or a damaged shaft. Replace shocks in pairs on the same axle so damping stays even from side to side. Bushings and mounting hardware often wear alongside the shock, so check them during installation.
- Look for oil streaks on the shock body
- Inspect the shaft for scoring or pitting
- Replace shocks in pairs on the same axle
- Check upper and lower mounts before reinstalling
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | M9502 |
| UPC | 803696212197 |
| Shock series | M95 Performance |
| Body design | Monotube |
| Gas charge | High-pressure nitrogen |
| Piston | Floating |
| Bore | 46mm |
| Bump stop | Internal |
| Mounting | 180 degree directional |
| Sold as | Each |
Vehicle fitment
It is a direct fit for light trucks, Jeeps and SUVs. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the mounting is directional at 180 degrees, the shock’s orientation matters; set it to line up with the mounting points on your application before tightening anything.
What’s included
Sold as each, so every shock is a separate unit. Before installing, gather any mounting hardware or boot your application needs.









