Overview
The Skyjacker Black Max B8528 is a rear shock absorber for three Jeep generations: the 1984 to 2001 Cherokee XJ, the 2004 to 2006 Wrangler LJ Unlimited and the 1997 to 2006 Wrangler TJ. It comes with a black boot, is sold individually and is covered by a limited lifetime warranty from Skyjacker.
The shock is a twin tube hydraulic unit from the B8500 series. Its multi-stage valving is set for the specific vehicle, and the foam-cell design helps keep oil expansion from affecting performance as the shock heats. For a Jeep rear axle, confirm the trim against your vehicle before ordering.
Key features
- Rear position for the rear axle of the listed Jeeps
- Twin tube construction with hydraulic damping
- Vehicle-specific multi-stage valving
- Increased fluid capacity, which the manufacturer links to heat dissipation
- Sintered iron piston and chrome plated shaft
- Black boot included and a limited lifetime warranty
Maintaining Jeep rear shocks
Rear shocks on a Jeep carry the load of off-pavement travel and cargo, so they tend to run warm and collect grit. Twin tube hydraulic shocks with multi-stage valving are designed to control both compression and rebound, and the bushings and mounts need to be sound for the valving to work as intended. A bouncy rear end after a dip or oil on the shock body are the usual signs of wear.
Inspect the boot and the chrome shaft after each trip, and wipe away grit before it reaches the seal. Replacing both rear shocks on an axle together keeps the Jeep tracking straight. Support the vehicle on jack stands before removing a rear shock, since the suspension should not rest on a jack alone.
- Inspect boot and shaft after trail use
- Wipe grit from the shaft before it reaches the seal
- Replace both rear shocks on an axle together
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | B8528 |
| UPC | 803696238135 |
| Product line | Black Max B8500 series |
| Shock series | Replacement |
| Position | Rear |
| Construction | Twin tube |
| Piston | Sintered iron |
| Shaft | Chrome plated |
| Damping | Hydraulic |
| Boot | Black boot included |
| Warranty | Limited lifetime |
| Sold as | Individually |
Vehicle fitment
It fits the 1984 to 2001 Jeep Cherokee (XJ) in Base, Chief, Country, Laredo, Limited, Pioneer and Sport trims. It fits the 2004 to 2006 Jeep Wrangler (LJ) in Unlimited and Unlimited Rubicon trims, and the 1997 to 2006 Jeep Wrangler (TJ) in Rubicon, Sahara, Sport, SE, X and 65th Anniversary Edition trims.
No Wrangler YJ, JK or JL entries appear on this list, and Grand Cherokee models are not included. The LJ entries cover Unlimited trims only. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Support the vehicle on jack stands before removing a rear shock, since the suspension should not rest on a jack alone.
What’s included
One Black Max B8528 rear shock with black boot, sold individually. A pair requires two units.









