Overview
The Skyjacker JLFTBA18 is an adjustable front track bar for the Jeep Wrangler JL and the Jeep Gladiator JT. Its length adjusts to center the front axle under the body, which is the job a track bar does once a lift changes the axle position. It is rated for 2 to 6-inch lifts.
It is a direct fit for the 2018–2019 Jeep Wrangler JL in Rubicon, Sport, Sport S and Unlimited trims, and the 2020–2026 Jeep Gladiator in Overland, Rubicon, Sport and Sport S trims. It is a front part.
Key features
- Adjustable length to center the front axle
- Rated for 2 to 6-inch lifts
- Direct fit for the listed JL and JT models
- Front position
Before the alignment check
A track bar keeps the front axle from moving side to side under the body as the suspension cycles. When a lift moves the axle, the bar’s effective length and angle change, which is why an adjustable bar is useful during a lift install. Setting the length is a matter of centering the axle, not adding travel, so the bar should be adjusted before the alignment is done. Check that the bar moves freely at both ends through full suspension travel.
Ends should be inspected for play at the bushings or joints after the first few trail outings, especially on a Wrangler that sees rock crawling or rough dirt. Look for worn bushings, bent bar sections, and loose frame or axle mounts. Keep the jam nuts tight once the length is set, and recheck them after the first few drives.
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | SKYJLFTBA18 |
| Position | Front |
| Adjustable | Yes |
| Lift height | 2 to 6 inches |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2018–2019 Jeep Wrangler (JL), including Rubicon, Sport and Sport S 2-door models and Unlimited Rubicon, Unlimited Sahara, Unlimited Sport and Unlimited Sport S 4-door models, and the 2020–2026 Jeep Gladiator (Overland, Rubicon, Sport and Sport S).
Wrangler JL models from 2020 on, and earlier Wrangler generations, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
After the track bar is set to length, have the alignment checked, since the front axle position has changed with the lift.






