Overview
The Skyjacker YJ20FS is a front Softride leaf spring for the 1987–1995 Jeep Wrangler (YJ), covering the Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara and Sport trims. It is a single spring meant for 2-2.5 inch lift setups.
The spring is made from American steel, and each leaf is shot-peened with hardened steel pellets fired at high velocity, which raises the steel’s tensile strength. Peening is designed to support maximum wheel travel and ride quality without shortening spring life. It has a lift height range of 0 to 4.99 inches. Bushings are not included.
Key features
- American steel construction
- Each leaf shot-peened with hardened steel pellets
- Single front spring
- Intended for 2-2.5 inch lift setups
- Lift height range 0 to 4.99 inches
- Direct fit for the listed Wrangler YJ trims
Shot-peened leaves explained
Shot peening is a surface treatment that bombards each steel leaf with small hardened pellets. The impact compresses the outer layer of the steel, which raises its tensile strength and helps the leaf resist fatigue cracking over repeated flex. It is a common process on heavy-duty springs and is one reason peened leaves tend to hold their shape over time.
For a Wrangler YJ, the spring is usually one part of a larger front suspension. Shocks, bump stops and the track bar should be inspected when the spring is changed, because they work together to control the axle. A spring that is matched to the lift and to the rest of the setup gives a steadier ride, and it wears more evenly over the years.
- Inspect shocks and bump stops at the same time
- Check track bar bolts for play
- Look for leaves that have shifted at the center bolt
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | YJ20FS |
| UPC | 803696167435 |
| Position | Front |
| Spring quantity | Single spring |
| Bushings | Not included |
| Material | American steel |
| Surface treatment | Shot-peened leaves |
| Lift height range | 0 to 4.99 inches |
| Intended lift use | 2-2.5 inch lifted springs |
| Fitment type | Direct fit |
Vehicle fitment
It is a direct fit for the 1987–1995 Jeep Wrangler (YJ) in the Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara and Sport trims.
It is intended for the 1987–1995 Wrangler YJ, so the later Wrangler TJ and other years fall outside its scope. Compare year, model and trim against your vehicle before ordering.
Installation notes
Front mounts need bushings, and none are included, so have a set on hand before the spring goes in. Because the spring is meant for a 2-2.5 inch lift, have the alignment and driveline angles checked once the work is finished.
What’s included
One front leaf spring.
Not included: spring bushings.






