Select your vehicle

Skyjacker Softride Leaf Spring Rear – CR12S

Skyjacker

In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 17, 2026 6:20 AM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Fits listed 1969–1994 Chevrolet and GMC trucks, Blazer and Jimmy models included
  • Part number CR12S, rear single leaf spring
  • Rubber bushings pre-installed
  • Lift height range 0 to 4.99 inches
  • American steel with limited lifetime warranty

Description

Overview

The Skyjacker CR12S is a rear Softride leaf spring for listed 1969–1994 Chevrolet and GMC trucks, including K10, K20, K5 Blazer, Blazer, Jimmy and V-series models. It comes with pre-installed rubber bushings and has a lift height range of 0 to 4.99 inches.

The CR12S is a progressive multileaf pack with load capacity equal to or greater than original equipment, made from American steel and covered by a limited lifetime warranty. It is a single spring, and two are needed for a pair. Rear springs set axle position, so spring rate and height both change how the rear end rides.

Key features

  • Progressive multileaf pack design
  • Load capacity equal to or greater than original equipment
  • American steel
  • Rear position, direct fit
  • Pre-installed rubber bushings
  • Lift height range of 0 to 4.99 inches
  • Limited lifetime warranty

Rear spring basics

The rear springs carry the bulk of the cargo and passenger load on these trucks, and they locate the rear axle front to back. Changing rear spring height alters the angle of the axle relative to the driveshaft, which affects how the driveline runs and how the truck squats under acceleration. A rear spring with a progressive pack usually feels softer unloaded and firmer as weight is added.

Rear springs often wear together with shackles, bushings and bump stops. A sagging rear leaf pack, a rear end that sits low on one side or a clunk over bumps are all signs the spring may be due for replacement. Rear shocks should be checked at the same time so the new spring is not paired with worn damping.

  • Check driveline angles after the swap
  • Inspect shackles and hangers for wear
  • Replace worn rear shocks alongside the spring
  • Look for uneven rear ride height

Specifications

Brand Skyjacker
Part number CR12S
UPC 803696121345
Product line Softride leaf spring
Position Rear
Spring quantity Single spring (order 2 for a pair)
Bushings Rubber bushings included, pre-installed
Lift height range (inches) 0 to 4.99
Material American steel, progressive multileaf pack
Fitment type Direct fit
Warranty Limited lifetime

Vehicle fitment

Suburban bodies and model years from 1995 onward are outside its fitment. Check year, model and trim against your truck before ordering.

Not covered: Suburban bodies, which are not on this list, and model years from 1995 onward. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

The rubber bushings come pre-installed, so no separate bushing set is needed. A rear lift changes pinion angle, so check driveline angles after installation.

What’s included

One rear Softride leaf spring with pre-installed rubber bushings.

Not included: The second spring needed for a pair.

SKU: SKYCR12S Category:

Specification

Shipping weight 53.00 lbs
Package dimensions 51.00 × 11.50 × 2.50 in
brands

Fitment

VehicleYearsTrims
Chevrolet Blazer1973–1974, 1987–1994Base, Cheyenne, Custom Deluxe, Scottsdale, Silverado, Silverado Sport
Chevrolet K101969–1986Cheyenne, Custom, Custom Deluxe, Deluxe, Pickup Base, Scottsdale, Silverado
Chevrolet K201969–1986Cheyenne, Custom, Custom Deluxe, Deluxe, Pickup Base, Scottsdale, Silverado
Chevrolet K5 Blazer1975–1986Base, Cheyenne, Custom, Custom Deluxe, Deluxe, Scottsdale, Silverado
Chevrolet V101987Custom Deluxe, Scottsdale, Silverado
Chevrolet V201987Custom Deluxe, Scottsdale, Silverado
GMC Jimmy1973–1991Base, High Sierra, Sierra Classic, Sierra Grande, Street Coupe
GMC K151975–1978Base, High Sierra, Indy Hauler, Sierra Classic, Sierra Grande
GMC K15/K15001969–1974Pickup Base
GMC K15001979–1986Base, High Sierra, Sierra Classic, Sierra Grande
GMC K251975–1978Base, High Sierra, Sierra Classic, Sierra Grande
GMC K25/K25001969–1974Pickup Base
GMC K25001979–1986Base, High Sierra, Sierra Classic, Sierra Grande
GMC V15001987Base, High Sierra, Sierra Classic
GMC V25001987Base, High Sierra, Sierra Classic

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the CR12S fit a 1987 Chevrolet Blazer?

Yes. 1987–1994 Chevrolet Blazer models are covered in Base, Cheyenne, Custom Deluxe, Scottsdale, Silverado and Silverado Sport trims. Match your trim and year before ordering.

Are the rubber bushings included with the CR12S?

Yes. The rear spring includes pre-installed rubber bushings, so no separate bushing set is needed for the spring itself. The second spring for a pair is not included.

What lift height range is given for the CR12S?

The CR12S carries a lift height range of 0 to 4.99 inches for this rear single spring. It is a rear part, so it changes rear suspension height rather than the front.

Does a rear spring change driveline angles?

Yes. Raising the rear changes pinion angle, which can cause driveline vibration if it moves too far from the transmission output angle. Check the driveline after installation, and inspect brake lines and the parking brake cable, which can be stretched by a higher axle.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon