Select your vehicle

Coil Spring Fitting Kit

ARB 4x4 Accessories

$39.80In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 17, 2026 3:20 AM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rear coil spring fitting kit, UPC 9332018002051
  • Rear-position kit
  • Vehicle fitment not named

Description

Overview

The ARB Coil Spring Fitting Kit is a rear-position kit from ARB 4×4 Accessories for fitting coil springs, with UPC 9332018002051 and a 10mm size.

Key features

  • Rear position
  • Size is 10mm.
  • Direct fit listed; no vehicle named

Fitting a rear coil

Rear coil springs are usually compressed or supported before the old one is removed, so the suspension can be unloaded safely. Use a stand or jack under the axle to hold the weight, and keep hands clear of the spring while it is under tension. Work slowly and confirm the spring seats fully in its upper and lower pockets before the axle is lowered.

Rear coils carry a large share of the vehicle’s weight, so the seats and pads around them deserve a close look during the job. Check for cracked or flattened rubber, worn spring seats and any corrosion that could let the coil shift. Replacing worn pads at the same time is a sensible habit, since they affect how the new spring sits.

Specifications

Brand ARB 4×4 Accessories
UPC 9332018002051
Position Rear
Size 10mm
Fitment Direct fit; no vehicle named

Vehicle fitment

Vehicle fit is not established for this kit. Check your year, model and make before ordering.

Confirm your vehicle’s year, model and trim before ordering.

What’s included

The kit is sold as a coil spring fitting kit. Its individual pieces aren’t itemized.

SKU: ARBOMEJKPR10 Category:

Specification

Shipping weight 0.20 lbs
Package dimensions 4.00 × 4.00 × 4.00 in
brands

Questions & Answers

Is the ARB coil spring fitting kit for the front or the rear?

Rear. This kit is for the rear position, so match it to the rear suspension when fitting. Confirm the position against your installation before starting work.

What does the 10mm figure on the ARB fitting kit measure?

The kit's size is 10mm. Confirm its use with your coil spring setup and check the fit for your year, model and trim before ordering.

Should the rubber pads be replaced with the springs?

Often yes. Worn pads can let a new coil shift or sit unevenly, so inspect them during the job and replace any that are cracked or flattened. Check the seats for corrosion too.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon