Overview
The Skyjacker JL25BPBLT is a 2 to 2.5 inch dual rate long travel coil spring lift for the 2018 Jeep Wrangler JL 4-door non-Rubicon. It fits the Unlimited Sahara, Unlimited Sport and Unlimited Sport S trims. The kit uses front and rear dual rate coil springs with Black MAX long travel shock absorbers.
The dual rate coils ride closer to stock on the highway than a single rate spring, and they allow more articulation off road. The kit includes extended front sway bar end links and bump stop extensions. The maximum tire size is 37 x 12.50 for street articulation and 35 inches for full off-road articulation, with a recommended 9 inch wheel at zero offset. The kit carries a limited lifetime warranty.
Key features
- Dual rate long travel coil springs front and rear
- Four Black MAX long travel shock absorbers included
- Front extended sway bar end links for full droop
- Front and rear bump stop extensions
- Grade 8 mounting hardware
- Limited lifetime warranty per the manufacturer
Dual rate coils explained
A dual rate spring uses two spring rates in one coil. The softer first rate handles normal road loads and daily ride. The firmer second rate starts only after the suspension compresses past a set point, which helps control the vehicle under heavy loads and during hard off-road movement.
Longer travel changes what the rest of the suspension sees. Brake lines, CV joints and the driveline all work through a larger range of motion, so they should be checked after installation. Articulation gains are most useful when the wheel and tire can move freely, so tire rub should be checked at full droop.
- Check brake line length at full droop
- Inspect CV boots for stretching after articulation changes
- Confirm the driveline angle at both ends
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | JL25BPBLT |
| UPC | 803696256580 |
| Lift height range | 2 to 2.5 inches |
| Suspension type | Coil spring kit |
| Front shocks | Black MAX long travel |
| Rear lift method | Coil springs |
| Maximum tire size | 37 x 12.50 street; 35 inch off-road full articulation |
| Recommended wheel | 9 inch, 0 offset |
Vehicle fitment
It fits the 2018 Jeep Wrangler JL Unlimited Sahara, Unlimited Sport and Unlimited Sport S. It is for 4-door non-Rubicon models.
The Rubicon uses a separate Skyjacker kit (JL25RBPBLT) and is not covered here. Two-door JL models are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Dual rate coils and long travel shocks change the ride height and the droop, so set the front and rear height and check the brake line and CV angle after the install. Align the front end after installation.
What’s included
The kit includes dual rate front and rear coil springs, four Black MAX long travel shock absorbers, extended front sway bar end links, front and rear bump stop extensions and grade 8 mounting hardware.










