Overview
The Daystar PABK02PA is a rear U-bolt and block kit that provides a 2 in. lift. It pairs cast iron blocks with coated U-bolts for adding height at the rear axle.
The kit provides 2 in. of lift at the rear and installs in approximately 1 hour. Confirm fit for your vehicle’s year, model and trim before ordering.
Key features
- 2 in. lift height for the rear
- Cast iron blocks included
- Coated U-bolts included
- Installs in approximately 1 hour
Rear suspension considerations
A rear block lift raises the axle relative to the frame, which changes the pinion angle and the length of components like the brake lines and shock mounts. Greater angle can cause driveline vibration, so inspect the U-joints after installation. The blocks also shift the rear geometry, so pay attention to how the truck tracks at speed.
Because the U-bolts clamp the axle directly, check their seating and thread condition before driving. Retighten after the first few drives and recheck periodically. Consider whether the rear shocks need extra length to match the new height, since a shock working at its limit can wear quickly.
- Inspect U-joints after the lift
- Check brake line length
- Confirm shock travel is adequate
- Recheck U-bolt nuts after the first drives
Specifications
| Brand | Daystar |
|---|---|
| Part number | PABK02PA |
| UPC | 618089005641 |
| Lift height | 2 in. |
| Position | Rear |
| Blocks | Cast iron |
| U-bolts | Coated |
| Installation time | Approximately 1 hour |
Vehicle fitment
Confirm fit for your truck’s year, model and trim before ordering, because this rear kit depends on the axle and spring setup.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation takes approximately 1 hour for the rear blocks and U-bolts. Check that the U-bolts match your axle before starting.
What’s included
The kit includes cast iron blocks and coated U-bolts.
Not included: Check the package contents for nuts, washers and other hardware before installing.








