Overview
The Skyjacker JL15BPMLT is a coil spring lift kit with four M95 long travel shocks for 2018 and later Jeep Wrangler JL four-door models that are not Rubicon. It fits the Unlimited Sahara, Unlimited Sport and Unlimited Sport S. It is a 1 to 1.5 inch lift with a 0 to 2.25 inch lift height range.
Each coil carries a different left and right rate for the JL and is fitted at both the front and the rear. The first rate gives a highway ride, and the coil expands as the suspension droops so it stays in the upper bucket at full droop. The second rate engages only after compression passes the first, and it keeps the truck controlled through body roll and heavy off-road movement.
The kit also includes extended front sway bar end links, which allow full droop, and bump stop extensions that make sure the suspension clears the tires at bump. The M95 shocks are a monotube design, and they are length fitted to give the maximum extension for full articulation. Grade 8 mounting hardware and a limited lifetime warranty come with the package.
Key features
- Dual rate long travel coil springs, front and rear
- Left and right rates specific to the JL
- Four M95 long travel shocks
- Extended front sway bar end links
- Front and rear bump stop extensions
- Grade 8 mounting hardware
Driving with monotube shocks
Monotube shocks use a single pressure tube with a floating piston. This layout helps the shock resist fade and foaming during long, rough runs, which is why it suits a lifted vehicle that spends time on uneven ground. The shock length also sets how much extension is available at full articulation, so a length-fitted unit keeps the suspension from reaching its limit too early.
Lift height changes how the truck steers and how the driveline sits, so the alignment and driveline angles should be checked after the coils and shocks are installed. Keep mounting hardware tight during the first few drives, since new brackets settle. Watch for uneven tire wear and a steering wheel that sits off center, both of which point to alignment or bushing issues that should be addressed early.
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | JL15BPMLT |
| UPC | 803696256566 |
| Suspension type | Coil spring kit |
| Lift range | 0 to 2.25 inch |
| Front shocks | M95, four included |
| Max tire size | 35 inch street articulation, 33 inch off-road full articulation |
| Recommended wheel | 9 inch with 0 offset |
| Warranty | Limited lifetime |
| Fitment type | Direct fit |
Vehicle fitment
It is a direct fit for the 2018 Jeep Wrangler JL Unlimited Sahara, Unlimited Sport and Unlimited Sport S, four-door non-Rubicon models.
The Rubicon version is a separate part, JL15RBPMLT, and two-door Wrangler JL models are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
After installation, check the front and rear alignment and the driveline angles, which lift kits of this height change. Fit the bump stop extensions and extended sway bar end links at the same time as the coils, since the kit is designed to work as a set.
What’s included
Dual rate long travel coil springs front and rear, four M95 long travel shocks, front extended sway bar end links, front and rear bump stop extensions, and Grade 8 mounting hardware.














