Overview
The Mishimoto Silicone Coolant Hose Kit is a black set of upper and lower radiator hoses for the 1987-1990 Jeep Cherokee (XJ) with the 4.0L 6-cylinder engine. Mishimoto builds the hoses from five layers of silicone with heat-resistant embedded fibers to replace the OEM rubber hoses while keeping OEM fitment.
The upper hose carries hot coolant from the engine to the radiator, and the lower hose returns cooled coolant to the engine. The kit suits owners who want more heat and pressure tolerance than stock rubber hoses provide. It is backed by the Mishimoto Lifetime Warranty. This kit is black.
Key features
- Five layers of silicone construction
- Heat-resistant embedded fibers for heat and pressure tolerance
- Upper and lower radiator hoses included
- Worm-gear clamps included for installation
- Designed to retain OEM fitment on the listed Cherokee XJ
- Black finish with Mishimoto Lifetime Warranty
Cherokee XJ cooling care
The 4.0L six-cylinder in the XJ runs a compact cooling layout, and the upper and lower hoses sit close to the radiator, fan and engine accessories. That closeness means a hose that has softened or swelled can rub or pinch against nearby parts. Checking the hose routing whenever the hoses are off helps confirm the new parts sit clear of the fan and the belt path.
Radiator caps and thermostats on these older Cherokees are worth looking at during the same job. A tired cap cannot hold pressure, and a sticking thermostat can keep the engine running cooler or hotter than it should. Replacing the hoses while the system is drained is an efficient point to check both.
- Confirm the fan clears the upper hose after reinstalling
- Inspect the radiator neck and overflow connection
- Check the thermostat housing gasket for seepage
- Note the hose routing before removing the old parts
Specifications
| Brand | Mishimoto |
|---|---|
| Part number | M/AMMHOSE-XJ6-91BK |
| Product type | Coolant hose kit |
| Hose material | Silicone with heat-resistant embedded fibers |
| Construction | Five layers of silicone |
| Color | Black |
| Engine | 4.0L 6 cylinder |
| Fitment type | Direct Fit |
| Warranty | Mishimoto Lifetime Warranty |
Vehicle fitment
It fits the 1987-1990 Jeep Cherokee (XJ) in the Base, Chief, Laredo, Limited, Pioneer and Sport trims.
It fits only the Cherokee XJ among these vehicles. Later Cherokee and Wrangler model years are not covered. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The included worm-gear clamps secure each hose end. Silicone is a different material from rubber, so seat each hose fully over its connection before clamping. Drain coolant below the hose connections before removing the old hoses, and work only on a cool engine, since hot coolant can scald.
What’s included
Upper radiator hose, lower radiator hose and worm-gear clamps.









