Overview
The Mishimoto MHOSEWR612RD is a red silicone radiator hose kit for the 2012–2018 Jeep Wrangler (JK) with the V6 engine. The kit replaces the upper and lower radiator hoses with silicone hoses in place of the rubber originals, and it includes four worm-gear clamps.
Each hose is built from five layers of silicone with heat-resistant fibers embedded in the walls. This construction offers greater durability, heat tolerance and pressure tolerance than rubber, which can degrade over time. The kit is a direct-fit replacement for the stock upper and lower hoses on a Wrangler JK V6 cooling system.
Key features
- Five layers of silicone in every hose
- Heat-resistant fibers embedded in the silicone
- Upper and lower radiator hoses in one kit
- Four worm-gear clamps included
- Red finish
- Mishimoto Lifetime Warranty
Silicone hose maintenance
Silicone hoses resist heat and pressure well, but they still need periodic checks. Silicone can be more flexible than rubber, so a hose can look fine while the clamp beneath it loosens. Inspect the clamps after the first few drives and again at every coolant service. The Wrangler JK V6 engine bay is tight, and hoses routed near the fan shroud, belts or exhaust components can show light scuffing over time.
When you refill the system, use the coolant type your engine requires and bleed trapped air fully. Silicone hoses do not need special coolant, but fresh coolant helps protect the radiator and the new hoses together. Keep an eye on the hoses during warm-up and cool-down for any slow seepage.
- Recheck clamp tension after initial heat cycles
- Look for rub marks where hoses pass near moving parts
- Keep the hose ends seated fully over the connections
- Inspect the radiator neck when the hoses are off
Specifications
| Brand | Mishimoto |
|---|---|
| Part number | MHOSEWR612RD |
| Manufacturer code | MMHOSE-WR6-12RD |
| Product type | Coolant hose kit |
| Hose material | Five-layer silicone with heat-resistant embedded fibers |
| Color | Red |
| Engine | 6 cylinder (V6) |
| Fitment type | Direct fit |
| Included hoses | Upper and lower radiator hoses |
| Included clamps | Four worm-gear clamps |
| Warranty | Mishimoto Lifetime Warranty |
Vehicle fitment
It fits the 2012–2018 Jeep Wrangler (JK) with the V6 engine. Covered trims are the 2-door Rubicon, Sahara, Sport, Sport S and 75th Anniversary, and the Unlimited 4-door Rubicon, Sahara, Sport, Sport S and 75th Anniversary.
Wrangler JK models from 2007 to 2011 are not in the 2012–2018 fitment list, and the newer JL generation Wrangler is a different model. Confirm your vehicle’s year, model and trim before ordering.
What’s included
- Upper radiator hose
- Lower radiator hose
- Four worm-gear clamps









