Overview
The Mishimoto MMRAD-F2D-99 is a full aluminum replacement radiator for the 7.3L Powerstroke diesel. It is a direct fit for the 2000-2003 Ford Excursion and the 1999-2003 Ford F-250 and F-350 Super Duty.
It is built for work trucks, mud trucks and modified pull trucks, where the cooling system carries heavy loads. It has a two-row brazed aluminum core and TIG-welded end tanks. It installs in place of the original unit and bolts up to the stock fan shroud.
Key features
- Full aluminum construction for the 7.3L Powerstroke
- Two-row brazed aluminum core, 2.2 inch thick
- TIG-welded end tanks
- Precision engineered for factory fitment
- Bolts up to the stock fan shroud
- Magnetic drain plug included
- Backed by the Mishimoto lifetime warranty
Work truck cooling setup
Heavy towing and low-speed hauling put the cooling system under constant heat, and the radiator is where that heat leaves the coolant. An aluminum core with two rows helps move heat efficiently, and a full aluminum build is lighter than many older units. Clean airflow through the core and a sound fan shroud keep it doing that job.
On a diesel truck, a radiator swap is a good time to inspect the water pump, thermostat, hoses and fan clutch. Hoses that feel stiff or swollen should go in at the same time. Check the fan shroud mounting points for cracks, since the original shroud is reused with this radiator.
- Clean bugs and debris from the core face regularly
- Inspect the fan clutch for play or wobble
- Replace hoses that show cracks or soft spots
- Flush and refill with the coolant your engine requires
Specifications
| Brand | Mishimoto |
|---|---|
| Part number | MMRAD-F2D-99 |
| UPC | 748354810363 |
| Type | Replacement |
| Fitment | Direct Fit |
| Engine application | 7.3L Powerstroke |
| Number of cores | Two |
| Core thickness | 2.2 inch |
| Core material | Brazed aluminum |
| Construction | Full aluminum, TIG-welded end tanks |
| Included hardware | Magnetic drain plug |
| Warranty | Mishimoto lifetime warranty |
Vehicle fitment
Mishimoto’s manufacturer fitment list covers the 2000–2003 Ford Excursion in Eddie Bauer, Limited and XLT trims, and the 1999–2003 Ford F-250 Super Duty and F-350 Super Duty in Lariat, XL and XLT trims. The trim names shown are the trims Mishimoto lists.
Not on the list: the F-450 and F-550 Super Duty, the F-150, and the 2004 and later Super Duty models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The radiator is designed to bolt up to the stock fan shroud, so the original shroud is reused. Because it is a direct-fit replacement, it is meant to take the place of the factory radiator on a matching truck. Let the engine cool completely before opening the cooling system, since hot coolant can cause burns.
What’s included
The magnetic drain plug is included with the radiator.




















