Overview
The Omix-Ada Cooling System Kit, part number 17118.21, is a set of radiator hoses, a thermostat housing and a thermostat for 4.2L six-cylinder CJ Jeeps from 1972 to 1986. It is designed so the cooling system’s wear parts can be replaced together. It fits 1972–1983 CJ5, 1972–1975 CJ6, 1976–1986 CJ7 and 1981–1985 Jeep Scrambler models.
The kit is meant for servicing the cooling system. Drain the old coolant, install the new components and refill the system. Omix-Ada says its parts are engineered to meet or exceed OE quality standards, and the kit includes new hoses, a new thermostat housing and a 195 degree thermostat with gasket.
Key features
- New upper and lower radiator hoses
- New thermostat housing
- 195 degree thermostat
- Gasket for the thermostat housing
- Four radiator hose clamps
- Engineered to meet or exceed OE quality standards.
Cooling system service checks
Replacing cooling hoses and the thermostat housing at the same time saves a second teardown. Old hoses soften from the inside and can collapse under suction when the engine cools, so flex each one before removal. Thermostats can stick either open or closed, which causes slow warm-up or overheating, so a new unit is a sensible match for a worn housing.
Before refilling, make sure the clamps are seated and the housing gasket sits flat. Bleed trapped air from the system so the thermostat can work correctly. On an older CJ, check the water pump, fan belt tension and radiator cap, since a weak cap or loose belt can undo the work done on the hoses.
- Inspect the radiator core for leaks or clogs
- Check the fan belt tension before the first drive
- Pressure test the system after refilling
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 17118.21 |
| UPC | 804314295585 |
| Engine | 4.2L 6-cylinder |
| Thermostat | 195 degree |
| Hose clamps | Four |
| Fitment | Direct fit |
Vehicle fitment
Fits 1972–1983 Jeep CJ5, 1972–1975 Jeep CJ6, 1976–1986 Jeep CJ7 and 1981–1985 Jeep Scrambler models, in the trims named for each year.
Years after 1986 and other Jeep models are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Drain the old coolant before removing the existing hoses and thermostat housing, and let the engine cool first. Install the new components, then refill the system with the coolant your engine requires.
What’s included
The kit includes the upper radiator hose, lower radiator hose, thermostat housing, 195 degree thermostat, gasket and four radiator hose clamps.
Not included: Coolant is not included in the kit.







