Overview
The Mishimoto MMINTF2D08SL is a heavy-duty aluminum intercooler for the 6.4L Powerstroke in 2008 to 2010 Ford trucks. It replaces the factory intercooler with a bar-and-plate core and cast aluminum end tanks. The design aims to lower intake temperatures and reduce pressure drop, which can help support turbocharger life.
The core is 18% thicker than the factory cooler and offers 20% more core volume. Those changes aim to improve airflow and keep intake temperatures lower under load. It is offered in Stealth Black or Sleek Silver and carries a Mishimoto lifetime warranty.
Key features
- Cast aluminum end tanks built for durability
- 3.35 inch bar-and-plate core
- Core volume increased 20% over the factory cooler
- Core thickness 18% greater than the factory cooler
- End tank design aimed at optimal airflow
- Intended to reduce turbo stress and extend turbo life
- OEM-style quick disconnect outlet
Keeping intake temperatures in check
Charge air temperature rises when the turbocharger compresses air, and hot air holds less oxygen per volume. Cooling that air before it enters the cylinders helps the engine make consistent power under load and can reduce strain on the turbo. A cooler with a deeper core and larger volume gives the air more time and surface area to shed heat during sustained work.
Fitting a larger cooler is also a system job. The inlet and outlet size should match the tubes and couplers in use, and the routing should avoid heat sources and sharp bends that restrict flow. After installation, check boost and intake temperatures under load to confirm the setup behaves as expected, and recheck clamps after the first heat cycles.
- Confirm tubes and couplers match the inlet size
- Route piping away from hot exhaust parts
- Check clamps after the first heat cycles
- Inspect the core for debris after off-road use
Specifications
| Brand | Mishimoto |
|---|---|
| Part number | MMINTF2D08SL |
| UPC | 748666004948 |
| Application | 6.4L Powerstroke, 2008 to 2010 Ford trucks |
| Material | Aluminum, with cast aluminum end tanks |
| Core type | Bar-and-plate, 3.35 inch |
| Core thickness | 18% thicker than the factory cooler |
| Core volume | 20% increase over the factory cooler |
| Inlet/outlet size | 3.23 inches |
| Outlet type | OEM-style quick disconnect |
| Warranty | Mishimoto lifetime warranty |
Vehicle fitment
It is made for the 2008 to 2010 Ford 6.4L Powerstroke. Confirm fit for your truck’s year, engine and configuration before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Intercooler tubes are not included, so confirm you have compatible tubes before starting the installation. The 3.23 inch inlet and outlet size is the connection measurement to check against the tubes you plan to use.
What’s included
The intercooler unit with its OEM-style quick disconnect outlet.
Not included: Intercooler tube(s).

















