Overview
The Mishimoto MMHOSE-XJ6-91BL is a blue silicone coolant hose kit for the 4.0L six-cylinder in 1990 to 1997 Jeep Cherokee XJ models. It includes upper and lower radiator hoses and worm-gear clamps.
The manufacturer list for this kit names the Cherokee XJ in the Base, Briarwood, Classic, Country, Laredo, Limited, Pioneer, SE and Sport trims. The hoses are made from five layers of silicone with heat-resistant embedded fibers, and Mishimoto includes its lifetime warranty.
Key features
- Upper and lower radiator hoses in one kit
- Five layers of silicone with heat-resistant embedded fibers
- Designed for improved heat and pressure tolerance.
- Worm-gear clamps included
Heat and age on XJ hoses
The Cherokee XJ cooling system runs hot in stop-and-go traffic and on grades, which puts repeated stress on the radiator hoses at both ends. Silicone holds up well to that heat cycling, and reinforced layers help it resist swelling under pressure. Because the hoses are slipped over fittings and held by clamps, the connections are where most leaks start, so they deserve a close look whenever the hoses are off.
Older Cherokee owners often replace the hoses along with the water pump, thermostat and radiator cap during a cooling system refresh. Inspect the radiator fins and the clamp tightness at the same time, and make sure the hose routing does not rub on nearby brackets or the fan shroud. Use the coolant type the engine calls for and refill slowly to avoid trapped air pockets.
Specifications
| Brand | Mishimoto |
|---|---|
| Part number | MMHOSE-XJ6-91BL |
| Engine | 4.0L six-cylinder |
| Color | Blue |
| Material | Five layers of silicone with heat-resistant embedded fibers |
| Included | Upper and lower radiator hoses, worm-gear clamps |
| Warranty | Lifetime |
| Fit type | Direct fit |
Vehicle fitment
The manufacturer list for this kit names 1990 to 1997 Jeep Cherokee (XJ) in the Base, Briarwood, Classic, Country, Laredo, Limited, Pioneer, SE and Sport trims.
Wrangler, Grand Cherokee and other Jeep models are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Worm-gear clamps are included for the hose connections. Let the engine cool before loosening any clamp, since coolant stays hot after driving.
What’s included
The kit includes upper and lower radiator hoses and worm-gear clamps.












