Overview
The Mishimoto Silicone Coolant Hose Kit, part number M/AMMHOSE-WR6-07CA, is a camo upper and lower radiator hose set for the 2007-2011 Jeep Wrangler JK with the 3.8L V6. Radiator hoses carry coolant between the engine and radiator, and Mishimoto makes this kit from high-grade silicone with heat-resistant embedded fibers as a replacement for OEM rubber hoses.
Silicone hoses retain OEM fitment while providing increased pressure tolerance. The kit handles a maximum temperature of 330 F and carries the Mishimoto Lifetime Warranty. This kit is camo.
Key features
- Upper and lower radiator hoses included
- High-grade silicone with heat-resistant embedded fibers
- Designed to retain OEM fitment on the listed Wrangler JK
- Maximum temperature of 330 F
- Worm-gear clamps included for installation
- Camo finish with Mishimoto Lifetime Warranty
Hose service on a JK V6
The 3.8L V6 in the Wrangler JK sits in a fairly crowded engine bay, and the radiator hoses run close to the fan shroud and accessory drive. Silicone hoses are more flexible than the rubber originals, so they can shift slightly under engine movement. Checking the routing after the first drives helps confirm the hoses stay clear of moving parts and do not rub against brackets.
Good results depend on clean connections. Remove any old residue from the radiator neck and engine fittings, and seat each hose fully before tightening the clamps. Off-road use can add flex and vibration to the engine bay, so a quick look at the hoses after a rough trail day is a sensible habit.
- Check clearance to the fan shroud after installation
- Inspect the radiator neck for nicks or old residue
- Look for slight movement at the clamps after trail use
- Keep the coolant level topped up between services
Specifications
| Brand | Mishimoto |
|---|---|
| Part number | M/AMMHOSE-WR6-07CA |
| Product type | Coolant hose kit |
| Hose material | High-grade silicone with heat-resistant embedded fibers |
| Maximum temperature | 330 F |
| Engine | 3.8L V6 |
| Color | Camo |
| Fitment type | Direct Fit |
| Warranty | Mishimoto Lifetime Warranty |
Vehicle fitment
It fits the 2007-2011 Jeep Wrangler (JK), in 2-door and 4-door models, including the 70th Anniversary, Rubicon, Sahara, Sport, X and Unlimited trims.
Wrangler model years from 2012 onward are not covered, and the Wrangler JL and later models are not covered. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The kit includes worm-gear clamps for the hose ends. Silicone is a different material from rubber, so seat each hose fully over its connection before clamping. Drain coolant below the hose connections before removing the old hoses, and work only on a cool engine.
What’s included
Upper radiator hose, lower radiator hose and worm-gear clamps.










