Overview
The Russell Performance 639260 is an aluminum fuel line with a 3/8 in. tube size and a 25 ft. length. It is made for 37 degree flare adapter fittings and routes fuel to Y blocks and from the pump to the carburetor.
It is a lightweight aluminum line.
Key features
- Aluminum construction
- 3/8 in. tube size
- Red finish
- Designed for 37 degree flare adapter fittings
- Lightweight aluminum construction
Running fuel lines cleanly
A clean run starts with planning the route. Lay the line out with the fittings dry-fitted, mark the bends and leave room for the line to move slightly without pulling on a connection. Keep the tube away from exhaust heat and moving linkage, and support it with clamps at regular intervals so it does not sag or vibrate against the body.
Aluminum tube is easy to work with but can be damaged by careless bending. Make gradual bends with a tubing bender, avoid kinking, and deburr the cut ends before flaring. After assembly, pressurize the system and check each joint, then recheck clamps after the first few drives.
- Dry-fit fittings and mark bends before cutting
- Support the run with clamps
- Deburr cut ends before flaring
Specifications
| Brand | Russell Performance |
|---|---|
| Part number | 639260 |
| UPC | 87133392608 |
| Material | Aluminum |
| Tube size | 3/8 in. |
| Length | 25 ft. |
| Color | Red |
| Fitting type | 37 degree flare adapter fittings |
Vehicle fitment
No vehicle year, make, model or engine is named for this line. Match its runs to the pump, carburetor and Y block layout of your fuel system.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Fittings must be 37 degree flare to match this line, so confirm your adapters before assembly. Fuel lines should be leak-checked after assembly.
What’s included
Fittings, clamps and brackets are not included, so have them on hand before assembly.









