Overview
The Crown Automotive J0643841 is a brake bleeder screw with 1/4 inch x 28 threads. It fits the driver or passenger side, front or rear axles, on classic Jeeps including the CJ3, CJ5, CJ5A, CJ6 and CJ6A, Willys CJ-2, CJ-3, CJ-5 and CJ-6, and the 1941-1942 Willys MB.
A bleeder screw is the valve opened to let air and old fluid out of a caliper or wheel cylinder when the brakes are bled.
Key features
- 1/4 inch x 28 threads
- Fits driver or passenger side
- Front or rear axles
- Covers Willys and early CJ Jeeps
Bleeding the brakes
A bleeder screw is opened to let air and old fluid out of a caliper or wheel cylinder. Its threads are small, so the screw can be damaged by pliers or by overtightening. Use a wrench that fits the flats, apply steady pressure, and keep a clear hose on the screw so fluid does not spray onto the drum or backing plate.
Before bleeding, check the brake fluid level and keep the reservoir topped up so air is not drawn back in. Work in a set order, starting farthest from the master cylinder, and close each screw before the pedal is released. Old brake fluid absorbs moisture and can cause a spongy pedal, so bleeding a system with old fluid is often part of a complete service. Replace a screw that rounds off or leaks around its threads.
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J0643841 |
| UPC | 70000703064 |
| Part type | Brake bleeder screw |
| Thread | 1/4 inch x 28 |
| Position | Front or rear axles, driver or passenger side |
| Fit type | Direct fit |
Vehicle fitment
It is a direct fit for Jeep CJ3, CJ5, CJ5A, CJ6 and CJ6A models from 1959 to 1971, Willys CJ-2 to CJ-6 from 1946 to 1958, and the 1941-1942 Willys MB.
CJ7 and later Jeep models are not on this list. Confirm your vehicle’s year, model and trim before ordering.









