Overview
The Crown Automotive wheel cylinder bleeder screw, part number 3766674, is a rear-position bleeder screw for wheel cylinders and disc brake calipers. It fits CJ (1976-1986), Wrangler (1987-2006) and Cherokee (1984-2001) models.
It serves the wheel cylinder as well as front and rear disc brake calipers. Check your model year before ordering, since the application years are the main sizing detail.
Bleeding older drum and disc brakes
Bleeder screws on older vehicles spend years exposed to moisture and road salt, so they often corrode in place. A seized screw can snap when force is applied, leaving the caliper or wheel cylinder needing extra work. Soak the threads with penetrating oil before opening, and turn the screw slowly.
When bleeding, keep the reservoir topped up and use a clear hose to see air leaving the line. Bleed the wheel farthest from the master cylinder first, then work toward the nearest. Replace a screw that is rounded, cracked or leaking, and clean the sealing face before fitting a new one.
- Replace seized screws rather than forcing them
- Inspect threads and sealing faces before fitting
- Keep the reservoir full during bleeding
- Use a clear hose so air is easy to see
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 3766674 |
| UPC | 848399081572 |
| Position | Rear |
| Application | Wheel cylinder and disc brake caliper |
| Fitment label | Direct Fit |
Vehicle fitment
The wheel cylinder and front disc caliper fit Wrangler from 1987 to 2006, and the rear disc caliper fits Wrangler from 2003 to 2006. The caliper version fits Cherokee from 1984 to 2001.
Wrangler JK (2007-2018) and later Wrangler models are not covered, and no Grand Cherokee application is included. Verify the year, model and trim against your vehicle first.
What’s included
Check whether a dust cap, washers or other hardware is needed for your installation before starting.
Not included: Brake fluid and brake lines are separate items. Check your brake system before ordering.









