Overview
The Rugged Ridge ORV leaf spring perch, part number 18267.02, is a universal steel perch that is 2 inches wide. It is designed to be welded onto 3-inch diameter axle tubes and is used when an axle needs a new or relocated leaf spring seat.
The perch is from ORV Suspension and is universal fit, so the tube diameter is the main fit check before welding.
Key features
- Universal steel construction
- 2 inches wide
- Designed for welding onto 3-inch diameter axle tubes
- Perch type
Welding a perch to the axle
A perch welded to an axle tube carries the weight of the spring at a fixed point, so the joint has to be sound. Before welding, clean the tube, confirm the tube diameter matches the perch, and decide the spring position. Mark the perch location with the spring installed and check that the spring sits level. Small changes in position can move the axle relative to the driveline.
Use welding methods suited to axle steel and allow the joint to cool before loading the spring. After the first trail runs, inspect the weld for cracks and check that the spring has not shifted on the perch. Steel perches resist wear from the spring, but they are only as good as the joint holding them in place. Keep the area clear of mud and debris so cracks are easy to spot.
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 18267.02 |
| UPC | 804314221874 |
| Material | Steel |
| Width | 2 inches |
| Axle tube diameter | 3-inch diameter |
| Type | Perch |
| Fitment type | Universal fit |
Vehicle fitment
This universal fit perch has no vehicle years, models or axle makes named. Its design is for 3-inch diameter axle tubes, so confirm your tube diameter before welding.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The perch is designed to be welded on, so welding is required. Check that the axle tube is 3-inch diameter before you start.
What’s included
One perch is included under this part number.
Not included: welding equipment and consumables, since the perch is designed to be welded on.












