Select your vehicle

Rugged Ridge ORV Leaf Spring Perch – 18267.04

Rugged Ridge

Shop Rugged Ridge Leaf Spring Perch on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rugged Ridge ORV leaf spring perch, part number 18267.04
  • Steel perch 3 inches wide, designed for 3-inch diameter axle tubes
  • Weld-on design for a direct fit
  • No vehicle fitment listed

Description

Overview

The Rugged Ridge ORV leaf spring perch, part number 18267.04, is a steel perch 3 inches wide and built to be welded onto 3-inch diameter axle tubes. It is offered as a general-purpose perch, not one made for a named vehicle, so the tube diameter is the key thing to verify before fitting.

Key features

  • Steel perch
  • 3 inches wide
  • Sized for 3-inch diameter axle tubes
  • Weld-on mounting, a direct fit onto the tube

Weld-on versus bolt-on perches

Weld-on perches trade the convenience of bolts for a permanent mount, which makes the setup more dependent on the tube and the welder. A bolt-on perch can be removed and adjusted, but a welded perch stays where it is put, so the position needs to be confirmed before the first weld. Plan the spring location with the axle on stands and the wheels in their normal position.

Welded perches also need a little more care afterward. Look at the weld toes and the perch base for cracks after rough trail use, and check that the spring pack is not rubbing the tire or frame. Keep notes on the setup so the next service starts from known measurements.

  • Confirm the spring location before the first weld
  • Keep the axle on stands while setting the position
  • Inspect the weld toes after rough trail use
  • Record measurements for future service

Specifications

Brand Rugged Ridge
Part number 18267.04
UPC 70000531123
Type Leaf spring perch
Manufacturer line ORV Suspension
Material Steel
Width 3 inches
Axle tube diameter 3 inches
Mounting Weld-on

Vehicle fitment

This is a general-purpose perch sized for 3-inch diameter axle tubes. Measure the tube on your axle before choosing this part.

No specific vehicle is named for this perch. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Mounting this perch means welding it to the axle tube, which makes it a fabrication task. Measure the tube, confirm it is 3 inches in diameter, and leave the welding to someone experienced with axle work.

What’s included

Confirm how many perches you need and whether any hardware comes with them before starting the job.

SKU: RUG18267.04 Category:

Specification

Shipping weight 1.00 lbs
Package dimensions 5.00 × 4.00 × 3.00 in
brands

Questions & Answers

What size is the Rugged Ridge 18267.04 perch?

It measures 3 inches wide and is designed for 3-inch diameter axle tubes. Check the length and thickness against your axle before buying.

Does the 18267.04 perch fit a particular vehicle?

No vehicle is named for this perch, which is a general-purpose part. Measure your axle tube and review your leaf spring setup, then weld the perch only after confirming the fit.

Can the 18267.04 perch be bolted on?

No. It is a weld-on perch, so it attaches to the axle tube by welding rather than bolts. Plan for a welding job rather than a bolt-on install.

How should a welded perch be inspected over time?

Look at the weld toes and the perch base for cracks, especially after rough trail use. Check that the spring seat stays square and the spring pack is not rubbing. Recheck the perch after the first few trips, then at regular service intervals.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Rugged Ridge Leaf Spring Perch on Amazon