Select your vehicle

Warrior Leaf Spring Perches – 250

Warrior

Shop Warrior Leaf Spring Perch on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Warrior universal weld-on leaf spring perches, 2.5 inches wide
  • Sold as a pair
  • Cut to fit axle tubes; other tube sizes need fill welding of gaps
  • UPC 63414600250

Description

Overview

The Warrior 250 is a pair of universal weld-on leaf spring perches, 2.5 inches wide. They are used to replace worn or damaged perches, to fit wider leaf springs, or to relocate leaf springs on an axle.

The perches are cut to fit axle tubes and will fit other tube sizes with fill welding of the gaps. No vehicle years, models or axle makes are named, and the only identifier is the 250 model number.

Key features

  • Universal weld-on design
  • 2.5 inches wide
  • Sold as a pair
  • Cut to fit axle tubes
  • Other tube sizes need fill welding of gaps

Preparing the axle for weld-on perches

Weld-on perches need clean, bare metal at the joint, so remove paint, rust and grease from the axle tube and the perch before setting anything in place. Clamp the perch in its intended position and check its alignment with the spring and axle centerline. A tack weld at each end lets you confirm the position before the final welds. Fill welding is the usual approach when the tube and perch do not match.

Welding a leaf spring seat puts heat into the axle tube, so work in short beads and let the tube cool between passes. Keep brake lines, wiring and bushings away from the heat source. After welding, inspect the joint for cracks and check that the spring sits flat on the perch. Re-inspect the welds after the first few trail runs, since they carry the spring load on every bump.

Specifications

Brand Warrior
Width 2.5 inches
Quantity Sold as a pair
Mounting Weld-on
Fitment type Universal fit
UPC 63414600250

Vehicle fitment

Warrior lists these perches as universal fit, with no vehicle years, models or axle makes named. Check the tube size against the perch before welding.

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

These are weld-on perches, so welding is required. Fill welding is needed wherever the tube and perch do not match. Use standard welding safety practices and work on a clean, supported axle.

What’s included

Two perches, sold as a pair.

Not included: welding supplies, since the perches are weld-on.

SKU: W/I250 Category:

Specification

Shipping weight 4.00 lbs
Package dimensions 5.00 × 4.00 × 4.00 in
brands

Questions & Answers

Are the Warrior 250 perches sold individually?

No. They are sold as a pair, so one purchase covers two perches. Each perch is 2.5 inches wide and designed for weld-on installation.

Will the 250 perches fit my axle tube?

They are cut to fit axle tubes and will fit other sizes, but gaps would require fill welding. Fitment is universal, so measure your tube before welding.

Does the Warrior 250 perch have its own part number?

This item is identified by its title number 250 and UPC 63414600250. Use those numbers to match the perch before ordering.

Can weld-on perches be used on a wider spring?

Yes. Weld-on perches can be used to fit a wider spring or relocate a spring on the axle. Mark the new position, check clearance around the spring and shock mounts, and tack the perch in place before final welding.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Warrior Leaf Spring Perch on Amazon