Overview
The Rugged Ridge Heavy-Duty Side Rocker Guards, part number 11504.16 in black, are rocker panels made from 3/16 inch thick steel plate with a 2 inch step extension for easier entry. They fit 2004–2006 Jeep Wrangler LJ Unlimited and Unlimited Rubicon models.
The rockers are designed to protect the most vulnerable points of the vehicle. They have cutouts for an off-road jack, and rubber gaskets seal the rockers against the paint and body.
Key features
- 3/16 inch thick steel plate
- Textured black powder coat finish
- 2 inch step extension for easy access
- Cutouts for an off-road jack
- Rubber gaskets seal against the paint and body
- Suited to most aftermarket fender flares
Before you buy
Steel rocker guards add protection and weight at the same time. Thick steel resists dents from trail rocks, though it adds weight to the lower body. Check that the rockers do not interfere with the fender flare, door hinges or step when fitted, and mock up the position before drilling. Handle the steel with care during fitting, since the powder coat chips on sharp edges and leaves bare metal exposed.
Rubber gaskets form the seal between the rocker and the paint, so inspect them for tears, flattening or dirt caught underneath. Replace worn gaskets before water and grit work into the seam, since rust starts at bare edges. When you change fender flares, recheck clearance around the rocker, because flare width and drop affect how the guard sits.
- Test-fit before drilling any mounting points
- Look at the gaskets each season for wear
- Touch up scratches at drilled holes to slow rust
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 11504.16 |
| UPC | 804314176013 |
| Material | 3/16 inch steel plate |
| Finish | Textured black powder coat |
| Step extension | 2 inch |
| Type | Tubular guard with tubular standoff |
| Installation type | Cutting or drilling required |
Vehicle fitment
They fit these vehicles:
- 2004–2006 Jeep Wrangler (LJ) Unlimited and Unlimited Rubicon
Two part numbers together cover 97–06 Wrangler and Wrangler Unlimited. Confirm which number matches your generation before ordering, and check the year and trim for your Jeep.
Installation notes
Cutting or drilling is required, so expect to drill the mounting points before the rockers are secured. The rubber gaskets are part of the seal against the paint, so keep them in place while the guards are fitted.
What’s included
The rubber gaskets are part of the design. Confirm the package contents match the steps in your installation before you start.









