Select your vehicle

JcrOffroad Crusader Rock Sliders (Bare Steel) – SWBSL-CRLJB

JcrOffroad

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • JcrOffroad Crusader rock sliders in bare steel, part number SWBSL-CRLJB
  • Fits 2004 to 2006 Jeep Wrangler LJ Unlimited and Unlimited Rubicon models
  • Made from 3/16 inch steel with built-in Hi-Lift jack points
  • Two-piece mini boat side design with wheel well to wheel well coverage
  • Supplied as a pair; made in the U.S.A.

Description

Overview

The JcrOffroad Crusader Rock Sliders in bare steel, part number SWBSL-CRLJB, are two-piece mini boat side sliders for the 2004 to 2006 Jeep Wrangler LJ Unlimited, including the Unlimited Rubicon. The two-piece design is built with higher ground clearance than traditional angle steel tube sliders.

The two-piece design works as a step on a lifted Wrangler. The steps are 3.5 inches wide, and the sliders give wheel well to wheel well coverage with built-in Hi-Lift jack points.

Key features

  • Two-piece mini boat side design
  • Steps 3.5 inches wide
  • Wheel well to wheel well coverage
  • Built-in Hi-Lift jack points
  • Made from 3/16 inch steel
  • Made in the U.S.A.

Two-piece sliders on a Wrangler LJ

A two-piece mini boat side slider splits the load between two sections instead of one long tube, which keeps the step usable while still covering the rocker. On an older Wrangler LJ Unlimited, the step area is often the part people use most for getting in and out on a lifted trail rig, so its width and height on the body affect everyday comfort as much as impact protection.

Older Wrangler bodies can have softer metal around the rocker and factory seams, so check for rust before fitting new hardware. Bare steel needs a protective finish to resist moisture, and bolt holes are the most likely place for corrosion to start. Plan the drill locations with the sliders held in place, and seal any exposed holes after mounting.

  • Inspect rocker seams for rust before drilling
  • Use paint or primer on bare steel after fitting
  • Check the step height after lifting the vehicle

Specifications

Brand JcrOffroad
Part number SWBSL-CRLJB
UPC 700007277711
Material 3/16 inch steel
Finish Bare steel
Type Formed plate guard with standoff
Step width 3.5 inches
Coverage Wheel well to wheel well
Jacking points Built-in Hi-Lift
Quantity Supplied as a pair
Installation Cutting or drilling required

Vehicle fitment

The manufacturer fitment list covers the 2004 to 2006 Jeep Wrangler (LJ), Unlimited and Unlimited Rubicon.

Wrangler models from other years, such as the 2007 to 2018 JK, are not on this list. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Mounting needs cutting or drilling. Mark and plan the drilling locations before starting, since the two-piece design is set up around those points.

What’s included

The sliders are supplied as a pair. Check the package contents against your installation before starting.

SKU: JCRSWBSL-CRLJB Category:

Specification

Shipping weight 76.00 lbs
Package dimensions 62.00 × 12.00 × 8.00 in
brands

Fitment

VehicleYearsTrims
Jeep Wrangler (LJ)2004–2006Unlimited, Unlimited Rubicon

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the JcrOffroad SWBSL-CRLJB fit a 2004 to 2006 Jeep Wrangler LJ?

Yes, the manufacturer fitment list includes the 2004 to 2006 Jeep Wrangler LJ Unlimited and Unlimited Rubicon. Confirm your vehicle's year, model and trim before ordering.

Can these sliders be used as a step?

Yes. The sliders work as a step on a lifted Wrangler, with steps 3.5 inches wide. The two-piece design gives wheel well to wheel well coverage.

What material are these sliders made from?

The sliders are made from 3/16 inch steel and come in bare steel. They are formed as a plate guard with standoff and are made in the U.S.A.

How do I check rock slider mounts after trail use?

Look at the mounting points and bolts after each hard run, especially where the slider meets the body. Tighten loose fasteners, check for cracked welds or bent steel, and touch up bare steel with a rust-inhibiting coat to slow corrosion.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon