Overview
The Rubicon Express RE2421 is a rear U-bolt kit for the Dana 35 rear axle on the 1987–1995 Jeep Wrangler YJ and the 1984–2001 Jeep Cherokee XJ.
The U-bolts are clear zinc plated, and the kit includes nuts and washers.
Installing and inspecting U-bolts
U-bolts clamp the axle to the leaf springs, so their condition affects alignment and how the axle stays put under load. Before installation, clean the threads and check that the nuts and washers match the kit. Install the U-bolts with the nuts evenly threaded, then tighten them in a cross pattern so the clamp seats square against the spring pack.
Re-check the U-bolt nuts after the first few drives, since new clamp plates and springs settle. Look for signs of wear such as elongated holes, cracked plates or threads that strip. Zinc plated U-bolts resist surface rust well, but a damaged coating is a cue to inspect for corrosion at the threads and replace the set if it spreads.
- Replace bent or stretched U-bolts
- Inspect spring pads and axle wraps
- Re-check nuts after the first drives
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE2421 |
| UPC | 614901440164 |
| Axle | Dana 35 rear |
| Finish | Clear zinc plated |
| Includes | U-bolts, nuts and washers |
Vehicle fitment
Based on the product name, this kit is for the YJ and XJ Jeeps with a Dana 35 rear axle, which covers the 1987–1995 Wrangler YJ and the 1984–2001 Cherokee XJ.
Confirm your rear axle is a Dana 35 and that your vehicle’s year, model and trim match before ordering.
What’s included
A complete U-bolt kit with nuts and washers.












