Overview
The Fabtech FTS724 is a U-bolt kit for securing an axle to its leaf springs. It comes as one kit of U-bolts, Nylock tall nuts and washers, and it is universal fit.
Part number FTS724 and UPC 674866007529 identify this set when comparing kits.
Key features
- Four U-bolts
- Eight Nylock tall nuts
- Eight thick flat washers
- Universal fit for any vehicle
Care and maintenance
Leaf spring clamps work loose gradually, so periodic inspection is more useful than a single check at install. Look at the U-bolt bends, the thread condition and the spring pad surfaces each time the wheels come off or the vehicle has been used hard. Surface rust on the threads is a sign to clean and re-lubricate the fasteners before torquing them again.
Off-road use puts repeated shock loads on the clamp, so a bolt that stays tight on the street may still shift on rough terrain. Keep a basic torque wrench and a spare nut in the vehicle, and retighten evenly after the first trail runs.
- Check U-bolt bends each service
- Inspect thread condition and clean rust
- Recheck nut torque after new install
- Examine spring pads for wear
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS724 |
| UPC | 674866007529 |
| Included hardware | Eight thick flat washers, eight Nylock tall nuts and four U-bolts |
Vehicle fitment
This kit is universal fit and is not tied to a year, make or model. Compare the axle type and spring setup on your own vehicle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The set contains four U-bolts, eight Nylock tall nuts and eight thick flat washers.








